Soft Lock Air Gap Peoblem??? - Page 3

Notch1320 · 11-10-2007, 08:52 AM

I have a brand new .330 disc soft lock in my 88 mustang stocker, and I can't get enough air gap.

No matter what I do, I only get about .035. I have an adj. cable, pedal stop, firewall adjuster, and have played with the pivot fork, and the McLeod adjustable throw out bearing spacers.

I have had the assembly in and out of the car at least 50 times trying different adjustments with the same .035 gap. Any suggestions?

McLeod Tech told me the only thing it could be is that I had the disc in backwards, but I just tore it back apart to verify it, and the clutch hub is towards the trans. This is my first solid hub disc... there is only a slight difference in either side of the disc. Any ideas here?

11-10-2007, 08:52 AM	#1
Notch1320 Member Join Date: May 2004 Location: Yuba City, CA Posts: 220 Likes: 0 Liked 0 Times in 0 Posts	Soft Lock Air Gap Problem??? I have a brand new .330 disc soft lock in my 88 mustang stocker, and I can't get enough air gap. No matter what I do, I only get about .035. I have an adj. cable, pedal stop, firewall adjuster, and have played with the pivot fork, and the McLeod adjustable throw out bearing spacers. I have had the assembly in and out of the car at least 50 times trying different adjustments with the same .035 gap. Any suggestions? McLeod Tech told me the only thing it could be is that I had the disc in backwards, but I just tore it back apart to verify it, and the clutch hub is towards the trans. This is my first solid hub disc... there is only a slight difference in either side of the disc. Any ideas here? __________________ Shawn Allsup K/S 718 Last edited by Notch1320; 11-10-2007 at 10:16 PM.