Before I put this on - Page 4

Hacksaw · 11-14-2018, 09:28 AM

Quote:

Originally Posted by Coleydog

After reading all these post it got me thinking, would it be better to dump the tank oil back into the pan (with a one way check valve) so the pump could continue pumping from a steady supply? Or is it ok to dump into the pressure column since some volumn would be forced back at the pump even though its sucking air (more bubbles) at the time?
Mike

I doubt the can could supply enough volume quickly enough to keep the pump supplied with oil. Better to feed the pressure side.

Larry Hill · 11-14-2018, 05:05 PM

Have all the plumbing match the feed hole in the block, don't make a restriction with fittings or hoses that are to small. If necessary enlarge feed holes in block

Coleydog · 11-14-2018, 05:06 PM

Quote:

Originally Posted by Hacksaw

I doubt the can could supply enough volume quickly enough to keep the pump supplied with oil. Better to feed the pressure side.

I see your point, thanks
Mike

11-14-2018, 05:05 PM	#32
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,642 Likes: 1,940 Liked 10,721 Times in 2,232 Posts	Re: Before I put this on Have all the plumbing match the feed hole in the block, don't make a restriction with fittings or hoses that are to small. If necessary enlarge feed holes in block __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 11-15-2018 at 08:12 AM.