Push rods

[CMcAllister]

Originally Posted by 1320racer

that rich 2 clueless nobodies that ain't got shyt nor done shyt worth talking about that think they know!

I'll bet they know who Denny Steward is and how long he's been around.

[Stan Weiss]

Originally Posted by goinbroke2

Pretty much every one ends in a ****show now......

Edit, Stan, I believe my ramp rate is considered "high" at 5.00 but not "very high" or "extreme". 249/250@ .050 Some of us know what you are talking about and appreciate your wisdom (and flow spec's!!)

Thank you. I believe that is calculated based on seat-to-seat and 0.050", but I don't know the exact logic used. I have sent you a PM about flow spec's.


Stan

[1320racer]

Originally Posted by CMcAllister

I'll bet they know who Denny Steward is and how long he's been around.

and I'll bet neither one of them has ever purchased anything from Denny Steward, FACT! Same as 99% of the daily/weekly posters on this forum.

[Jason Shepard]

Originally Posted by 1320racer

more lies, more blah, blah, blah and still no wally or big checks because you don't have none! FACT!!

Still waiting for proof of all your wally's and big checks

[Stan Weiss]

Originally Posted by Jason Shepard

Still waiting for proof of all your wally's and big checks

Jason,
I hope you have "The patience of Job".


Stan

[Adger Smith]

1320/Mr. Ed Thank you.. I really am glad I'm not on your list.
I really don't want to be associated with you. I shouldn't even be responding, but go ahead and say it.. by your standards I'm just another idiot.
With over 52 years in this industry I have done countless engines and machine work for local customers, some of them are local champions. I have served several National champions, in various classes. I even have 2 Tiller and Garden Tractor customers that are National Champions. I have several Class win Wally throphys and a wall full of NHRA & IHRA National records I set in classes from Stock to Comp. Oh, let's not forget Event wins... Funny thing is I got paid by all these customers. I also got paid for over 10 years to do the Technical service for Engine Masters Challenge.
Humm, I never saw your name on an Engine Masters Challenge winners or entry list. I never saw your name on the entry to Drag Week for the 3 years I was Drag week Race Director. In one of your posts I did read you buy your HP from a noteable shop. I'm Happy to know you have atleast one professional on your list. I guess writing a check makes you an expert on engines. Writing a check is far from professional so I'm putting you on my non Professionsl list..Oh, It is pretty clear you don't know me and you don't know Denny. Probably wouldn't hurt if you expand your horizons a little.
Oh so much for wrestling with a pig.. I know it is a Never win situation.. I just get dirty and the pig stays dirty. I'm out of here. 1320/Mr. Ed have a good day.

[james schaechter]

Adger, the only thing that Ed Bigley is consistent in is harassing people too good natured to put a stop to it.

He has been kicked off of every forum that I can tell except yellowbullet and this one.

He must have run into a real buzz saw at yellowbullet.

For a guy that says he likes the truth, the guys on yellowbullet dropped enough truth on Ed Bigley that he went running and never came back!

Try a google search of Ed Bigley yellowbullet.

Pretty much outlines who this guy really is

[1320racer]

Haters continuing to hate and yellowbullet, a porn site thinly disguised as a drag racing forum where over 90% of the daily posters are not racers. Yea they dropped the truth about me now keep holding onto that dream, you're pathetic! Meanwhile the TRUTH and the FACTS are not one of then has ever met me nor raced me and why is that...because they don't race.

[1320racer]

Originally Posted by Adger Smith

1320/Mr. Ed Thank you.. I really am glad I'm not on your list.
I really don't want to be associated with you. I shouldn't even be responding

you're right you shouldn't be! I'm glad you think you're special because you can measure to the 10 thousandth of an inch with specialty tools with a digital readout , set a few clearances and use a torque wrench, you're not! BTW, you disrespect your customers that write you a check. Without check writers, you're out of business!!!

Sorry Adger, I'm just not impressed, and FYI, I'd have to take a huge pay cut to be an engine builder!!

[Stan Weiss]

The forum shyt shoveled is back.

There is only one hater here, and you see him ever time you like in the mirror.

If there was a poll of who people here, who they are more impressed by. You or Adger it would something like Adger 1000 to 1 for You.

Stan