|
|
06-16-2021, 01:58 PM | #1 |
Member
Join Date: May 2017
Location: Webster, New York
Posts: 157
Likes: 311
Liked 122 Times in 57 Posts
|
Where is it legal to add ballast?
I am changing classes and need to add 100lb (ug). I will use 2, 1/2" bolts with welded nuts per the rules,
Is it legal -to add ballast in the passenger compartment? -to add ballast under the car? -to add ballast in the trunk? thanks in advance, Ray
__________________
Ray Bassett I/SA 1687, SS/DA 1687 "SuperPro is both", unknown |
Liked |
06-16-2021, 04:17 PM | #2 |
Senior Member
Join Date: Sep 2016
Posts: 838
Likes: 150
Liked 276 Times in 151 Posts
|
Re: Where is it legal to add ballast?
All are legal, provided proper mounting. Try over top of rear as first choice.
|
Liked |
06-16-2021, 10:43 PM | #3 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Where is it legal to add ballast?
|
Liked |
06-17-2021, 07:11 AM | #4 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,278
Likes: 1,636
Liked 9,456 Times in 1,957 Posts
|
Re: Where is it legal to add ballast?
Look in class rules and general regulations in the rule book on how to add weight safely. All so talk to tech and ask if there are places where adding weight is not allowed.
|
Liked |
06-17-2021, 11:40 AM | #5 |
Senior Member
Join Date: Apr 2009
Location: Omaha, NE
Posts: 673
Likes: 141
Liked 72 Times in 40 Posts
|
Re: Where is it legal to add ballast?
Would it be legal to add it to the rear axle housing vs inside the car?
|
06-18-2021, 08:32 AM | #6 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,278
Likes: 1,636
Liked 9,456 Times in 1,957 Posts
|
Re: Where is it legal to add ballast?
Guess you could make the axle tubes out of thicker material.
|
Liked |
01-27-2022, 04:36 PM | #7 |
Senior Member
Join Date: Dec 2008
Location: Rainy Washington
Posts: 577
Likes: 4
Liked 129 Times in 49 Posts
|
Re: Where is it legal to add ballast?
Best place for ballast is at the end of the track, waiting for you to it pick up.
__________________
James Boyce 6052 K/SA Stock National record holder 2015,2018,2 times in 2022,2023 |
Liked |
01-27-2022, 07:49 PM | #8 |
Member
Join Date: Jul 2015
Posts: 354
Likes: 62
Liked 238 Times in 93 Posts
|
Re: Where is it legal to add ballast?
|
01-26-2022, 08:20 PM | #9 |
Junior Member
Join Date: Nov 2008
Location: Baton Rouge LA
Posts: 41
Likes: 2
Liked 1 Time in 1 Post
|
Re: Where is it legal to add ballast?
General Regulations Section 21, page 19
General Regulations Requirements) is permitted. Removable weight must be securely mounted to the frame or frame structure by a minimum of two 1/2-inch-diameter steel bolts per 100 pounds, or one 3/8-inch steel bolt per 5 pounds; all other weight bars, pucks, etc. must use minimum 1/2-inch-diameter SAE grade 8 bolts for attachment. Hose clamps, wire, strapping, tape, tie wraps, etc. for securing weight or ballast prohibited. Acceptable forms of ballast are 1) Heavier gauge steel floors (i.e., 16- or 18-gauge, heavier gauge and/or plate steel prohibited); 2) Frame reinforcing cross members; or 3) the addition of protective equipment such as roll bars, flywheel shield, etc. If additional ballast is needed and is permitted by Class Requirements, it must be permanently attached to frame, bolted with two 1/2-inch-diameter bolts per 100 pounds, with nuts welded to bolts. Maximum amount of removable and/or permanent ballast, unless otherwise stated under Class Requirements, is 500 pounds. Cars running 8.49 and quicker are limited to 250 pounds maximum, per SFI chassis specification. |
01-26-2022, 09:37 PM | #10 |
Member
Join Date: Nov 2014
Posts: 304
Likes: 606
Liked 168 Times in 83 Posts
|
Re: Where is it legal to add ballast?
My suggestion would be if you have access to 4 corner scales see which corner of the car needs the weight.
|
|
|