|
|
08-06-2020, 12:28 PM | #1 |
Senior Member
Join Date: Jan 2002
Posts: 653
Likes: 8
Liked 238 Times in 25 Posts
|
Physics of Racing Torque Converters
Can anyone share the main governing equations for torque converters?
I think Russ Abrahams (sp) had something, but I can't remember them at this time. |
08-06-2020, 02:53 PM | #2 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: Physics of Racing Torque Converters
One of the formulas is K=n/square root T
K is number that is the looseness of the converter n is the stall speed T is the engine torque Russ Abrams 3011 GT/FA |
Liked |
08-07-2020, 09:53 AM | #3 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: Physics of Racing Torque Converters
some years ago Brandon with BTE did an extensive and informative series about a - z on the subject. Maybe that post is somewhere in the archives.
If it can't be found, maye Brandon would repost the series.
__________________
Larry Woodfin 471W |
08-07-2020, 10:05 AM | #4 |
Senior Member
Join Date: Jan 2002
Posts: 653
Likes: 8
Liked 238 Times in 25 Posts
|
Re: Physics of Racing Torque Converters
Russ, thanks for the reply.
Units are rpm and ft*lbs? But there must be something about torque at an rpm. Say you have an electric motor with a flat torque curve of 500 ft*lbs and you want stall of 6,000 rpm. What additional info is needed? |
08-07-2020, 11:21 AM | #5 |
Senior Member
Join Date: Feb 2002
Location: Southeast Michigan
Posts: 885
Likes: 63
Liked 221 Times in 102 Posts
|
Re: Physics of Racing Torque Converters
That is the whole point of that formula . You have to develop a K factor that gives you the rpm you want with the torque you have at that rpm . In general you have different stators and different pumps that will give you a combo that matches the K factor desired . units are in rpm and ft.lbs.
Last edited by ss3011; 08-07-2020 at 11:23 AM. Reason: added info |
Liked |
08-07-2020, 01:01 PM | #6 |
Member
Join Date: Feb 2008
Location: Black Creek, BC Canada
Posts: 312
Likes: 62
Liked 137 Times in 67 Posts
|
Re: Physics of Racing Torque Converters
If you can find a copy, "design of single stage, three element torque converters" by V. J. Jandasek explains torque converter function very well, including K factor. You might be able to get a copy from the SAE or it is in the third edition of "design practices, passenger car automatic transmissions", published by the SAE.
Jim Mantle V/SA 6632 |
Liked |
08-08-2020, 12:28 AM | #7 |
Member
Join Date: Jan 2016
Location: Colorado hills
Posts: 123
Likes: 11
Liked 73 Times in 36 Posts
|
Re: Physics of Racing Torque Converters
It might seem insignificant to most, but when you try to do math without using the correct units one will get incorrect answers.Torque is a twisting force and is typically expressed in lbs-ft while work is typically expressed in ft-lbs (energy). Yeah I know that seems to be nit picky but it makes a difference when you practice unit cancellation in the mathematics on the subject material.
Regards, HB2 Dissident |
Liked |
|
|