|
06-22-2018, 04:59 PM | #91 |
Member
|
Re: 69 Camaro B/S
The motor mount deal reared its ugly head again. To my understanding the BB mounts roll the motor 1/2' to the passenger side. With the SB mounts I loose the clearance on the header, Its not touching but its as close as it gets, I guess a small dent is in order. I also had to change the Z bar out for the SB one.
[IMG] Nice job on your project, can I ask why you had to change ZB to the Small Block one?
__________________
Keith A/S 2990/Terri A/SA 2991 "Imagine what you'd attempt, if you knew you could not fail!" |
06-22-2018, 06:03 PM | #92 |
Member
Join Date: Sep 2013
Posts: 280
Likes: 102
Liked 288 Times in 78 Posts
|
Re: 69 Camaro B/S
Nice job on your project, can I ask why you had to change ZB to the Small Block one?[/QUOTE]
Thanks! I used SB frame and motor mounts for the oil pan to clear the drag link. From what I have read the BB mounts roll the motor 1/2" to the passenger side. The BB z bar is 1/2" longer than the SB one to acount for that. I was looking at shimming out the frame mount for the z bar but with the SB one it fits like a glove. This is the same reason I'm tight on the header. Stahl recommended the BB mounts with these headers. |
06-23-2018, 01:54 PM | #93 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,166
Likes: 1,018
Liked 762 Times in 226 Posts
|
Re: 69 Camaro B/S
Honestly, if it was mine I'd face the mounting bosses off about .125 to move the box laterally. The rag joint should accomodate this. The column could be loosened up and lined up accordingly, as well. Then, no header gasket...just a thin bead of sealer like Valco Aluminized silicone.
For what it's worth. -Al
__________________
"That'll never work....." |
06-23-2018, 02:04 PM | #94 |
Senior Member
Join Date: Sep 2016
Posts: 838
Likes: 150
Liked 276 Times in 151 Posts
|
Re: 69 Camaro B/S
Do a mock up with a Vega Box. Note: You may need a special Pitman arm if you go that route.
|
06-23-2018, 02:31 PM | #95 |
Member
Join Date: Dec 2012
Posts: 227
Likes: 4
Liked 161 Times in 45 Posts
|
Re: 69 Camaro B/S
Calvin Elston makes the nearest smallest motor mounts for your car. You can put the motor where you need it to be. Also save a lot of time changing motors. The work like a motor plate. Completely NHRA legal for stock eleminator.
|
06-23-2018, 05:01 PM | #96 | |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: 69 Camaro B/S
Quote:
__________________
Todd Greene |
|
06-23-2018, 05:48 PM | #97 | |
Member
Join Date: Sep 2013
Posts: 280
Likes: 102
Liked 288 Times in 78 Posts
|
Re: 69 Camaro B/S
Quote:
|
|
06-23-2018, 05:51 PM | #98 |
Member
Join Date: Sep 2013
Posts: 280
Likes: 102
Liked 288 Times in 78 Posts
|
Re: 69 Camaro B/S
|
06-23-2018, 06:08 PM | #99 |
VIP Member
Join Date: Aug 2013
Posts: 1,766
Likes: 1,197
Liked 1,957 Times in 492 Posts
|
Re: 69 Camaro B/S
And a very cost effective idea too.
__________________
Todd Greene |
07-04-2018, 07:08 AM | #100 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,277
Likes: 1,635
Liked 9,453 Times in 1,956 Posts
|
Re: 69 Camaro B/S
Hope to see you and the car in the lanes soon. Some nice work! Good Luck.
|
|
|