CLASS RACER FORUM - View Single Post

Bill Belden · 04-18-2007, 09:43 AM

After you mount the tires drill into the tire bead, I used a 1/8 drill bit with a piece of tape on it to keep from drilling to deep, this solved my problem.
I found that the screws would push the bead away from the rim instead of going into the tire.

1100 I/S

04-18-2007, 09:43 AM	#3
Bill Belden Member Join Date: Jun 2002 Location: York, PA Posts: 241 Likes: 0 Liked 1 Time in 1 Post	After you mount the tires drill into the tire bead, I used a 1/8 drill bit with a piece of tape on it to keep from drilling to deep, this solved my problem. I found that the screws would push the bead away from the rim instead of going into the tire. 1100 I/S __________________ Bill Belden Retired Stock Eliminator [emailSTK1100@comcast.net[/email]