|
|
04-18-2007, 09:43 AM
|
#3 |
|
Member
Join Date: Jun 2002
Location: York, PA
Posts: 241
Likes: 0
Liked 1 Time in 1 Post
|
After you mount the tires drill into the tire bead, I used a 1/8 drill bit with a piece of tape on it to keep from drilling to deep, this solved my problem.
I found that the screws would push the bead away from the rim instead of going into the tire. 1100 I/S
__________________
Bill Belden Retired Stock Eliminator [emailSTK1100@comcast.net[/email] |
|
|
|
|
Threaded Mode