Lifters

RICK W · 04-01-2014, 06:54 PM

What brand of lifter is everyone using in there 350 superstock motors. I have 45 used comp lifters, should I send them back to get rebuilt?

Alan Roehrich · 04-01-2014, 07:21 PM

Comp has a very good rebuilding program, I use it for several customers.

Comp also has a new Sportsman series, which falls between the Endur-X series and the Elite series, and is available with roller bearings or a solid bushing style bearing.

One of the best things you can do is upgrade to the 0.904" diameter lifters, if you're still running 0.842" diameter lifters.

Mike Pearson · 04-01-2014, 07:37 PM

Morel with high pressure pin oil. Very nice lifter you can get them from Bullet I have run the rebuilt comps with good luck too.

55 Chevy · 04-03-2014, 12:29 AM

The Crower bushed lifters are very nice, not cheap though. Then again when those needle bearings fail that extra money will be very well spent.

See if those Comp's can be rebuilt with the bushings.

Alan Roehrich · 04-03-2014, 06:48 AM

As far as I know, Comp will not change a lifter with roller bearings to the sleeve bearing. And the only lifter they have listed with the sleeve bearing as an option is the Sportsman series.

RICK W · 04-03-2014, 05:44 PM

Thanks guys

04-01-2014, 06:54 PM	#1
RICK W Junior Member Join Date: Jun 2007 Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Lifters What brand of lifter is everyone using in there 350 superstock motors. I have 45 used comp lifters, should I send them back to get rebuilt?

04-01-2014, 07:21 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,113 Likes: 1,571 Liked 1,823 Times in 413 Posts	Re: Lifters Comp has a very good rebuilding program, I use it for several customers. Comp also has a new Sportsman series, which falls between the Endur-X series and the Elite series, and is available with roller bearings or a solid bushing style bearing. One of the best things you can do is upgrade to the 0.904" diameter lifters, if you're still running 0.842" diameter lifters. __________________ Alan Roehrich 212A G/S

04-01-2014, 07:37 PM	#3
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,449 Likes: 615 Liked 1,925 Times in 579 Posts	Re: Lifters Morel with high pressure pin oil. Very nice lifter you can get them from Bullet I have run the rebuilt comps with good luck too. __________________ Mike Pearson 2485 SS

04-03-2014, 12:29 AM	#4
55 Chevy Member Join Date: Feb 2008 Location: Calgary,Alberta area Posts: 229 Likes: 23 Liked 20 Times in 15 Posts	Re: Lifters The Crower bushed lifters are very nice, not cheap though. Then again when those needle bearings fail that extra money will be very well spent. See if those Comp's can be rebuilt with the bushings.

04-03-2014, 06:48 AM	#5
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,113 Likes: 1,571 Liked 1,823 Times in 413 Posts	Re: Lifters As far as I know, Comp will not change a lifter with roller bearings to the sleeve bearing. And the only lifter they have listed with the sleeve bearing as an option is the Sportsman series. __________________ Alan Roehrich 212A G/S

04-03-2014, 05:44 PM	#6
RICK W Junior Member Join Date: Jun 2007 Posts: 64 Likes: 0 Liked 0 Times in 0 Posts	Re: Lifters Thanks guys