Ford vs Chevy Build-up

HandOverFist · 11-27-2014, 08:41 PM

I elected to use the spring compressor today and the 4-cylinder springs went in easily. A-arm's don't swing as easily as I would like with these poly bushings, but they are not too bad. Front is done with the exception of Aerospace rotors and 4-piston calipers which are on the way...decided to use the same set-up as the Camaro. Finally snaked the front sway bar out of the car...geez what a chunk of metal. I'll be pulling the engine out in the morning and install the manual rack shortly after.

11-27-2014, 08:41 PM	#27
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Ford vs Chevy Build-up I elected to use the spring compressor today and the 4-cylinder springs went in easily. A-arm's don't swing as easily as I would like with these poly bushings, but they are not too bad. Front is done with the exception of Aerospace rotors and 4-piston calipers which are on the way...decided to use the same set-up as the Camaro. Finally snaked the front sway bar out of the car...geez what a chunk of metal. I'll be pulling the engine out in the morning and install the manual rack shortly after. __________________ Rich Taylor I/SA - 321