Front Disc brakes are a "drag".......

Kenney Kelley · 04-24-2011, 01:02 PM

The master cylinder is a good place to start looking . I also found the hoses going to the calipers and the one going to the rear end might look good on the outside but are plugged on the inside. We also changed the master cylinder and removed the stock proportation valve and replumbed the lines and that fixed our problem. I know this sounds like a lot of work but being able to stop on a short track is priceless. Kenney Kelley

04-24-2011, 01:02 PM	#4
Kenney Kelley Member Join Date: Dec 2006 Location: Cocoa Florida Posts: 205 Likes: 181 Liked 72 Times in 36 Posts	Re: Front Disc brakes are a "drag"....... The master cylinder is a good place to start looking . I also found the hoses going to the calipers and the one going to the rear end might look good on the outside but are plugged on the inside. We also changed the master cylinder and removed the stock proportation valve and replumbed the lines and that fixed our problem. I know this sounds like a lot of work but being able to stop on a short track is priceless. Kenney Kelley Last edited by Kenney Kelley; 04-24-2011 at 01:05 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode