Throttle Stopping a 700 CI Motor

nickh · 05-12-2011, 05:33 PM

Donnie Pedan is running a 737 on a throttle stop, he was running 9.91 at 193 mph. Donnie's website is www.countrymotorsinc.com he is a great guy and helped us with our converter on the car below.

Back in 05 & 06 we had a Haas Monte Carlo with a Schmidt "Hulk" 705 c.i. we never ran a throttle stop but we did run a 7.05 @ 196 on motor at 2450 lbs. and that was with a very conservative tune on the motor.

One thing I learned on working on the big motors is to think conservative and do not take big swings on the tuneup.

05-12-2011, 05:33 PM	#2
nickh Senior Member Join Date: Sep 2010 Location: Houston,Texas Posts: 826 Likes: 3,588 Liked 654 Times in 196 Posts	Re: Throttle Stopping a 700 CI Motor Donnie Pedan is running a 737 on a throttle stop, he was running 9.91 at 193 mph. Donnie's website is www.countrymotorsinc.com he is a great guy and helped us with our converter on the car below. Back in 05 & 06 we had a Haas Monte Carlo with a Schmidt "Hulk" 705 c.i. we never ran a throttle stop but we did run a 7.05 @ 196 on motor at 2450 lbs. and that was with a very conservative tune on the motor. One thing I learned on working on the big motors is to think conservative and do not take big swings on the tuneup.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode