"G" Body suspention tips ?

CJohnson · 08-02-2009, 03:20 AM

Quote:

Originally Posted by Dave Jung

Craig, you need a set of arms like these

http://www.maliburacing.com/iceman/G...%20uppers.html

Hey guys thanks for all your help, much appreciated

Dave, I will have to take back the edelbrock ones i bought from mopac, what is the difference between them, how long did it take to ship the iceman control arms to your door

Thanks

Dave Jung · 08-02-2009, 11:16 AM

Craig, I had my set shipped to the parcel depot in Sumas, Washington and went to pick them up across the line. That way shipping cost and time are cheaper and faster. And you pay no brokerage fees. They came very quickly, less than a week to Sumas. It is pretty nice stuff and priced well compared to the same stuff from other companies. Dave

http://www.shiphappenssumas.com/

Dave Jung · 08-02-2009, 11:21 AM

Craig, if you look at the ones from the link, they have the angle built in to adapt the A-body housing to the G-body chassis. He also sells the regular ones that are straight, those are the ones I have as my housing is custom made to be the proper ear locations for the G-body. I use a set of four from him, the non-adjustable lower ones are legal. Look around the rest of his site, his comunication during the transaction was good too.Dave

SSGN · 08-03-2009, 07:25 PM

Real fast Buick Grand nationals use 10 bolts well into the 9s.The no hop bars are old school ,look at these set ups www.HRpartsNstuff.com

CJohnson · 08-03-2009, 11:50 PM

Quote:

Originally Posted by Dave Jung

Craig, if you look at the ones from the link, they have the angle built in to adapt the A-body housing to the G-body chassis. He also sells the regular ones that are straight, those are the ones I have as my housing is custom made to be the proper ear locations for the G-body. I use a set of four from him, the non-adjustable lower ones are legal. Look around the rest of his site, his comunication during the transaction was good too.Dave

Thanks Dave, I ordered his 12 bolt upper arms today, he is a real nice guy to deal with.

GTO/GN · 08-06-2009, 05:31 PM

I have been using the the 8.5 ten bolt in my Grand National. I put Moser 30 spline axles, Eaton posi and c-clip eliminators. Using the stock 3.42 ring and pinoin and it has held up to countless 25 lbs of boost trans brake leaves and it has gone 9.64 @ 140.11...

CJohnson · 08-07-2009, 12:40 AM

Ya the 8.5's are stronger than some people give them credit for, my old man runs one in his racecar with stock 28 spline axels auburn posi and 3.91's

BRUCE COMPTON · 08-07-2009, 08:11 AM

Craig,

We have built several G body cars including a stock eliminator Malibu wagon, If you want or can give
me a call and I will tell you about the stuff we have found. Most of the tips you have gotten are good
but there is more. Bruce Compton Boise,Idaho 208-362-3570

08-02-2009, 11:16 AM	#2
Dave Jung Member Join Date: Oct 2008 Location: Surrey B.C. Posts: 135 Likes: 3 Liked 5 Times in 5 Posts	Re: "G" Body suspention tips ? Craig, I had my set shipped to the parcel depot in Sumas, Washington and went to pick them up across the line. That way shipping cost and time are cheaper and faster. And you pay no brokerage fees. They came very quickly, less than a week to Sumas. It is pretty nice stuff and priced well compared to the same stuff from other companies. Dave http://www.shiphappenssumas.com/ __________________ 6535 stk 81 Malibu K/SA

08-02-2009, 11:21 AM	#3
Dave Jung Member Join Date: Oct 2008 Location: Surrey B.C. Posts: 135 Likes: 3 Liked 5 Times in 5 Posts	Re: "G" Body suspention tips ? Craig, if you look at the ones from the link, they have the angle built in to adapt the A-body housing to the G-body chassis. He also sells the regular ones that are straight, those are the ones I have as my housing is custom made to be the proper ear locations for the G-body. I use a set of four from him, the non-adjustable lower ones are legal. Look around the rest of his site, his comunication during the transaction was good too.Dave __________________ 6535 stk 81 Malibu K/SA

08-03-2009, 07:25 PM	#4
SSGN Senior Member Join Date: Feb 2006 Posts: 646 Likes: 132 Liked 140 Times in 51 Posts	Re: "G" Body suspention tips ? Real fast Buick Grand nationals use 10 bolts well into the 9s.The no hop bars are old school ,look at these set ups www.HRpartsNstuff.com

08-06-2009, 05:31 PM	#6
GTO/GN Junior Member Join Date: Apr 2009 Location: Florida Posts: 38 Likes: 0 Liked 0 Times in 0 Posts	Re: "G" Body suspention tips ? I have been using the the 8.5 ten bolt in my Grand National. I put Moser 30 spline axles, Eaton posi and c-clip eliminators. Using the stock 3.42 ring and pinoin and it has held up to countless 25 lbs of boost trans brake leaves and it has gone 9.64 @ 140.11...

08-07-2009, 12:40 AM	#7
CJohnson Junior Member Join Date: Jul 2009 Location: .005 ahead of you Posts: 38 Likes: 0 Liked 0 Times in 0 Posts	Re: "G" Body suspention tips ? Ya the 8.5's are stronger than some people give them credit for, my old man runs one in his racecar with stock 28 spline axels auburn posi and 3.91's

08-07-2009, 08:11 AM	#8
BRUCE COMPTON Junior Member Join Date: Sep 2003 Location: BOISE,ID Posts: 42 Likes: 1 Liked 0 Times in 0 Posts	Re: "G" Body suspention tips ? Craig, We have built several G body cars including a stock eliminator Malibu wagon, If you want or can give me a call and I will tell you about the stuff we have found. Most of the tips you have gotten are good but there is more. Bruce Compton Boise,Idaho 208-362-3570