|
01-25-2010, 11:16 AM | #1 |
Junior Member
Join Date: Jan 2010
Posts: 1
Likes: 0
Liked 0 Times in 0 Posts
|
Turbo 400
I am fairly new to racing. I was wondering if there is anyone that runs a turbo 400 in Super Street.
|
01-25-2010, 11:20 AM | #2 |
Member
Join Date: May 2008
Location: Pittsburgh, Pa
Posts: 302
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Turbo 400
Yes many racer's use a 400 in SS/T and H/R. but you will need a transbrake.
__________________
|
01-25-2010, 12:06 PM | #3 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,438
Likes: 780
Liked 703 Times in 206 Posts
|
Re: Turbo 400
I've had great success in the past with the TH 400 in S/ST and even S/G and so have several of my customers. ........with the proper setup they work excellent ......Feel free to PM me for more detailed info. .......Tom
__________________
Tom Goldman 1500 SG , 1506 STK |
01-26-2010, 09:43 AM | #4 |
Junior Member
Join Date: Mar 2008
Location: Enfield, CT
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Turbo 400
I run the 400 with transbrake in my SS/T BB Ford (yes I know it is GM). It’s been very reliable in the 3200 lb Mustang.
|
01-26-2010, 01:44 PM | #5 |
Junior Member
Join Date: Jul 2009
Posts: 34
Likes: 4
Liked 0 Times in 0 Posts
|
Re: Turbo 400
I used to do it but have switched over the glide side. A friend of mine uses the 400, shifts to 2nd on time and rpm for 3rd, makes it pretty consistant keeping the rpm down when on the stop and not so crazy when coming back on.
|
01-26-2010, 05:30 PM | #6 |
Member
Join Date: Oct 2008
Location: PORT ST JOHN FLORIDA
Posts: 226
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Turbo 400
I use a th400 and have had problems with the sprag not holding after about40-50 runs.i put a center support from ati with a bearing on it,its supposed to help...but i will say the car is very consistent and dialable with the th400
scott fifield |
02-03-2010, 06:24 PM | #7 |
Junior Member
Join Date: Jul 2009
Posts: 34
Likes: 4
Liked 0 Times in 0 Posts
|
Re: Turbo 400
Scott, I hope that center support helps you, it was almost a common sight to see you pullin the trans out between rounds.
|
02-04-2010, 09:41 AM | #8 |
Member
Join Date: Oct 2008
Location: PORT ST JOHN FLORIDA
Posts: 226
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Turbo 400
Hey dave,your absolutely right and it got old..i lost more rounds from that than being beat!! At reynolds i ran desio 2nd round had him pretty good on the tree and it didnt shift into 2nd gear
see you in bradenton scott |
|
|