A Arm bushings

Alan Roehrich · 06-30-2010, 05:56 PM

Del A Lum for the bushings, and Moog or TRW for the ball joints. If you can find a circle track supplier, they've got tall upper ball joints that will help the front end alignment when you launch the car. You might want to look at the control arm shafts that Moog and TRW make for wrecked cars, they allow a greater range of adjustments. You can probably get a lot more positive caster, and keep your camber and toe in closer to ideal at the same time. Check the holes in the frame where the lower control arm bushing bolts go.

06-30-2010, 05:56 PM	#3
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,118 Likes: 1,576 Liked 1,837 Times in 417 Posts	Re: A Arm bushings Del A Lum for the bushings, and Moog or TRW for the ball joints. If you can find a circle track supplier, they've got tall upper ball joints that will help the front end alignment when you launch the car. You might want to look at the control arm shafts that Moog and TRW make for wrecked cars, they allow a greater range of adjustments. You can probably get a lot more positive caster, and keep your camber and toe in closer to ideal at the same time. Check the holes in the frame where the lower control arm bushing bolts go. __________________ Alan Roehrich 212A G/S