|
![]() |
#4 |
Senior Member
Join Date: Jan 2008
Location: Texas
Posts: 706
Likes: 77
Liked 100 Times in 51 Posts
|
![]()
The TEE fitting is the same pipe thread as the gauge. Most likely 1/8" pipe on (male) on each end, and a -4 on the TEE side. Use the teflon hose to extend the line to the dash. Use a -4 brake line bulkhead fitting on the dash and put a -4 cap on it. On my dragster the bottle is easily accessible, so I can fill my bottle right at the regulator w/o the extra line. Hope this helps.
Last edited by voltdr; 10-10-2010 at 10:14 PM. Reason: added more info |
![]() |
![]() |
|
|