HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Bracket Racing
Register Photo Gallery FAQ Community Calendar

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-01-2010, 11:23 AM   #2
trikbag406
Junior Member
 
Join Date: Oct 2010
Location: Newport,Delaware
Posts: 16
Likes: 0
Liked 1 Time in 1 Post
Default Re: Here's a good question

Well,i'm not sure as far as a sbc,but have you ever considered a 4.3 v6? I had a 72 C-10 2wd 350/350,3.73 gears,and 27" tires (275-60-15),and swapped to a 30 over 4.3,marine hyd. roller,cast iron q-jet intake,milled out to accept an Edelbrock 600,home-built headers (very easy to do,use sbc truck headers),and a 2.71 or 2.73 12 bolt from a 69 Impala,and went from 15 mpg avg,to 20 or better.It was more labor than money,and the truck would still boogie pretty good around town.The biggest problem I had,was that the 4.3 sits so far back,there is no crossmember under the side motor mount bosses,so I fabbed vertical mounts off the front of the block like a 55-57 Bel-Air would have.Other than that,you need to extend your radiator hoses, p/s hoses,and fab up the headers,or find some v6 headers.If you have tall tires (30 inches+),the highway gear is gonna make it a real pig,but will certainly get good mileage.-Lew.
__________________
Tranquility base,the Vega has landed...
trikbag406 is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:39 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.