|
|
|
|
03-09-2012, 10:03 PM
|
#1 |
|
Senior Member
Join Date: Sep 2002
Posts: 502
Likes: 5
Liked 10 Times in 7 Posts
|
Re: carb ?
So ??????
__________________
Rick Bailey 3439 SC |
|
|
|
03-11-2012, 04:36 PM
|
#2 |
|
Member
Join Date: Oct 2003
Posts: 271
Likes: 54
Liked 0 Times in 0 Posts
|
Re: carb ?
Make sure the Float is set properly
Make sure the Needle & Seat are in good / usable condition Make sure the Seat Is Tight (yes, I have seen these loosen & start to back themselves out) Verify Proper Fuel Pressure
__________________
Larry Fulton |
|
|
|
|
03-12-2012, 12:09 AM
|
#3 |
|
Junior Member
Join Date: Nov 2008
Location: Cascade, CO
Posts: 48
Likes: 22
Liked 7 Times in 5 Posts
|
Re: carb ?
Is it really smoke?? Could it be fuel vapor coming back up from an open intake valve?
|
|
|
|
|
03-12-2012, 08:48 AM
|
#4 |
|
Junior Member
Join Date: Feb 2012
Location: westerly ri
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
Re: carb ?
most of the time its fuel vapor. left over gas in intake. if anything is leaking look down carb with flashlight you should see boosters dripping if seats/floats are leaking
|
|
|
|
|
03-12-2012, 09:52 AM
|
#5 |
|
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,195
Likes: 1,163
Liked 1,885 Times in 578 Posts
|
Re: carb ?
thanks guys, replaced needle and seat, metering gaskets, set bowl level, set pressure, no more smoke (vapor)
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody |
|
|
|
|
03-12-2012, 02:58 PM
|
#6 |
|
Member
Join Date: Oct 2011
Posts: 125
Likes: 47
Liked 21 Times in 9 Posts
|
Re: carb ?
Good job Keith
|
|
|
|
 |
|
|
Hybrid Mode
