Clutch switch

[Sean Marconette]

Right, wrong or indifferent, looks like Auto's yes, and Stick no. I do not know of anyone having one. It may not be a bad idea, but not a rule for a stick car.

Sean

See General Regulations 2:11.

TRANSMISSION, Automatic

Any model transmission (must be same make as car) having same
number of forward speeds (O.D. gear not required) and reverse
permitted. Transmission case must be OEM or aftermarket OEM
replica from a standard, automotive application as found in the
Official NHRA Stock Car Classification Guide. Aftermarket case
must meet SFI Spec. 4.1 and 30.1. NHRA-accepted adapter plates
permitted. Modifications to shifting patterns are permitted, provided
full shift pattern is retained. Full shift pattern must include park and
reverse. Any gear change must occur as a result of an internal
function of the transmission or from direct action by the driver.
Lockup converter permitted if OEM-equipped with lockup converter
and OEM transmission is used. Otherwise, lockup converters
prohibited. Electronic rpm controls for the electric (internal or
external to the transmission) shifting of automatic transmissions
permitted in computer-controlled vehicles only. Otherwise, any gear
change must occur as a result of an internal function of the
transmission or from direct action by the driver. Pneumatic,
hydraulic, electric, etc. controls and shifters in all noncomputercontrolled
electronic-fuel-injected vehicles prohibited. Deepened
stock or aftermarket transmission oil pans permitted. Drilling of
transmission case or rear of engine block to adapt incompatible
units prohibited. Functional neutral safety switch mandatory.
Transmission brake prohibited. Tailshaft modifications for bushing
replacement, or NHRA-accepted aftermarket tailshaft, permitted.
See General Regulations 2:12, 2:14.

TRANSMISSION, Manual

OEM or NHRA-accepted aftermarket transmissions having same
number of forward speeds (O.D. gear not required) as original, and
reverse, may be used. All gear changes must result from direct
action by the driver. Pneumatic, hydraulic, electric, etc. shifters
prohibited. Floor-shift conversion kits permitted. Clutchless
transmissions prohibited. Clutch must be used to change gears in a

conventional manner. See General Regulations 2:12.