converter?

art leong · 06-15-2012, 08:14 PM

I had similar problems and it turned out to be a stator support on the trans.
At first it was intermittant, usually happening when I used the 2 step. Then it wouldn't go above 1800 in gear under any circumstances.
I fought this problem for 8 months. Changed converters, ecu, coils, head, everthing but the trans and short block.
Was going to change short block but decided to change the converter again. That's when I was able to spin the stator support by hand. Changed front pump, fixed problem.
Stator support broke means no torque multiplication.

Tony Goodman · 06-15-2012, 09:10 PM

Similar problem also, a few years back. Stator support was the problem. Tony

06-15-2012, 08:14 PM	#1
art leong VIP Member Join Date: Dec 2001 Location: Richmond Hill, Georgia Posts: 2,003 Likes: 0 Liked 1 Time in 1 Post	Re: converter? I had similar problems and it turned out to be a stator support on the trans. At first it was intermittant, usually happening when I used the 2 step. Then it wouldn't go above 1800 in gear under any circumstances. I fought this problem for 8 months. Changed converters, ecu, coils, head, everthing but the trans and short block. Was going to change short block but decided to change the converter again. That's when I was able to spin the stator support by hand. Changed front pump, fixed problem. Stator support broke means no torque multiplication. __________________ Art Leong 2095 SS Last edited by art leong; 06-15-2012 at 08:16 PM.

06-15-2012, 09:10 PM	#2
Tony Goodman Junior Member Join Date: Jan 2006 Location: Zeeland, MI Posts: 98 Likes: 135 Liked 18 Times in 4 Posts	Re: converter? Similar problem also, a few years back. Stator support was the problem. Tony