1964 Dodge 330 "Race Hemi" - Page 2

Dyno · 07-12-2013, 05:53 PM

I know of a complete aluminum front group for sale for a 64 Dodge. The front fenders are NOS. Send me a PM for the phone number. Dyno

MWNorris · 07-14-2013, 07:44 AM

Quote:

Originally Posted by Bob Pagano

The Tynman page is ancient history.

what happen? I talked to him just a few months ago...

jimi · 07-12-2013, 08:08 PM

not trying to hijack the thread but here is mine. engine is finally done,hopefully It will be in the car by next week.

340Cuda · 07-13-2013, 11:38 AM

Quote:

Originally Posted by jimi

not trying to hijack the thread but here is mine. engine is finally done,hopefully It will be in the car by next week.

Drooling over both these cars!

Tom Nolan · 07-25-2013, 01:45 PM

I ordered Schumacher motor mounts, installed them on the plastic block, slotted the mounts welded to the K member. However something is messed up.......block sits crooked? Any advice?

Mark Madison · 07-25-2013, 03:31 PM

Quote:

Originally Posted by Tom Nolan

I ordered Schumacher motor mounts, installed them on the plastic block, slotted the mounts welded to the K member. However something is messed up.......block sits crooked? Any advice?

Do Not use the Schumacher Hemi to wedge conversion mount. They raise all kinds of hell with header clearance. Been there done that, Remember that one A-56? Infact Marks headers will not fit using that mount system.They are good to locate the engine placement, like Mark said the engine is skewed to the passenger side.There is a guy in Wisconson who makes the 64/65 Hemi K-members I was able to talk him into selling just the mounting brackets so I could weld up my K-member

Mark Madison
a/sa7995

Tom Nolan · 08-30-2013, 12:26 PM

Hemi project update.....stainless headers from Performance Welding were delivered by my good friend Rick Paton {thank goodness for friends that share the passion of cars and racing!} Mark from Performance Welding is a artist, these headers a beautiful! I couldn't help myself I took them out of the box and installed them on my mook up block in the car. Only took about 20 minutes. All I need now is a empty BBM 727 and I can bolt it all together to fabricate some motor mounts. Still waiting for a spot to open up at the chassis shop to install the cage......soon I hope.

Tom Nolan · 09-18-2013, 06:00 PM

What does everyone use on the 727 trans for a polyurethane mount? It looks like the mount that came with my car has been modified to be solid. Now I know from the past experiences that solid = cracked trans case. I cant seem to find any photo's of how they originally were. So any wisdom will help.

07-12-2013, 05:53 PM	#1
Dyno Senior Member Join Date: Dec 2002 Posts: 919 Likes: 1,147 Liked 693 Times in 205 Posts	Re: 1964 Dodge 330 "Race Hemi" I know of a complete aluminum front group for sale for a 64 Dodge. The front fenders are NOS. Send me a PM for the phone number. Dyno

07-12-2013, 08:08 PM	#3
jimi Member Join Date: Mar 2002 Location: usa Posts: 239 Likes: 7 Liked 21 Times in 8 Posts	Re: 1964 Dodge 330 "Race Hemi" not trying to hijack the thread but here is mine. engine is finally done,hopefully It will be in the car by next week. Attached Thumbnails Last edited by jimi; 07-12-2013 at 08:13 PM. Reason: pic did not attach

07-25-2013, 01:45 PM	#5
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 182 Likes: 0 Liked 64 Times in 11 Posts	Re: 1964 Dodge 330 "Race Hemi" I ordered Schumacher motor mounts, installed them on the plastic block, slotted the mounts welded to the K member. However something is messed up.......block sits crooked? Any advice?

08-30-2013, 12:26 PM	#7
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 182 Likes: 0 Liked 64 Times in 11 Posts	Re: 1964 Dodge 330 "Race Hemi" Hemi project update.....stainless headers from Performance Welding were delivered by my good friend Rick Paton {thank goodness for friends that share the passion of cars and racing!} Mark from Performance Welding is a artist, these headers a beautiful! I couldn't help myself I took them out of the box and installed them on my mook up block in the car. Only took about 20 minutes. All I need now is a empty BBM 727 and I can bolt it all together to fabricate some motor mounts. Still waiting for a spot to open up at the chassis shop to install the cage......soon I hope. Attached Thumbnails

09-18-2013, 06:00 PM	#8
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 182 Likes: 0 Liked 64 Times in 11 Posts	Re: 1964 Dodge 330 "Race Hemi" What does everyone use on the 727 trans for a polyurethane mount? It looks like the mount that came with my car has been modified to be solid. Now I know from the past experiences that solid = cracked trans case. I cant seem to find any photo's of how they originally were. So any wisdom will help.