|
![]() |
#10 |
Junior Member
Join Date: Aug 2013
Location: Chatham, ON. Canada
Posts: 19
Likes: 15
Liked 15 Times in 9 Posts
|
![]()
The roll cage was a pre-bent Jegster kit. All in all I thought the kit was fairly well put together. The bends had some deformation which is expected with a non mandrel bent tube but all of the required pieces were there. I used an 1 5/8” hole saw and a carbide bit to make all of the fish mouths. I’m by no means a fabricator but the welds and fitment are presentable. The welds were made with the Miller TIG.
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
|
|