Dyno numbers 305 - Page 6

Joe Schweigert · 03-14-2014, 09:21 AM

Quote:

Originally Posted by Ed Wright

Dave Layer does wonderful work! Unfortunately, so many know this he stays buried in work. Might want to get in line for a set.

Actually Dave is really prompt and his delivery and promise times are spot on. I've never had a long wait with him

Ed Wright · 03-14-2014, 10:19 AM

On time for sure. Not usually "next week". LOL

philbilly · 03-17-2014, 08:07 PM

For the ones that have kept up with the 305 build I BLOWED it up already. It was 2 tenths slow rnd 1 at the gators. I guess the valve face jammed into the head was reason why.
I put a order n at cp today for 2 more pistons. I need a spare just in case. Few weeks I be back together hopefully.

alejan1975 · 03-17-2014, 09:42 PM

Quote:

Originally Posted by philbilly

For the ones that have kept up with the 305 build I BLOWED it up already. It was 2 tenths slow rnd 1 at the gators. I guess the valve face jammed into the head was reason why.
I put a order n at cp today for 2 more pistons. I need a spare just in case. Few weeks I be back together hopefully.

Just too tight PTV clearance? Or did the valve drop?

good luck!

MR DERBY CITY · 03-17-2014, 10:09 PM

MR. P billy, what thickness head gasket Did you use ? M.J.

Mike Jones · 03-17-2014, 11:54 PM

Quote:

Originally Posted by philbilly

For the ones that have kept up with the 305 build I BLOWED it up already. It was 2 tenths slow rnd 1 at the gators. I guess the valve face jammed into the head was reason why.
I put a order n at cp today for 2 more pistons. I need a spare just in case. Few weeks I be back together hopefully.

Tough break...
hope you find out why and fix it fast!!
Good Luck

philbilly · 03-25-2014, 09:29 AM

My first go around with cp wasn't the best. I had to purchase a couple more pistons. This time I called Darin at Patterson and tht is one good dude. It's been 8 days and pistons are being shipped.

Mike Pearson · 03-25-2014, 09:53 AM

Quote:

Originally Posted by philbilly

My first go around with cp wasn't the best. I had to purchase a couple more pistons. This time I called Darin at Patterson and tht is one good dude. It's been 8 days and pistons are being shipped.

Darin is top notch. I have purchased all of my pistons and rings through him at Patterson. Great guy to deal with.

Mike Taylor 3601 · 03-26-2014, 09:15 AM

Phil,
Did you find piston/valve clearance problem? In picture you sent me it looked like you had some intake and some ex but not all of either hitting with it being somewhat random I would look at valves see if all same thickness and setting same depth,if they are the same probaly getting valve float with it being kind of random springs may not be set up evenly and have some with less pressure, all that is ok double check actual clearance piston to valve clearance.
I know valve broke had head popped off of stem that alot of times is sign of valve float,hitting piston did'nt help head stay on valve,but float will pop off heads of valves stretch and burr keeper grooves,can leave X or * asterick pattern on tip off valve where roller on rocker is beating on it,and timing chain stretched ,valve guides wollared out prematurely are all symptons of valve float.
Mike Taylor 3601

philbilly · 03-26-2014, 12:12 PM

Mike all the intake valves was hitting. I haven't taken it apart yet. Well short block anyway. I did find a couple sets of 416 cores so I got them parts. At least it isn't to bad I guess. Something's shouldn't be rushed! It isn't the first or last I am sure.

03-14-2014, 10:19 AM	#52
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Dyno numbers 305 On time for sure. Not usually "next week". LOL __________________ Ed Wright 4156 SS/JA

03-17-2014, 08:07 PM	#53
philbilly Member Join Date: Aug 2011 Location: Demossville,KY Posts: 337 Likes: 0 Liked 0 Times in 0 Posts	Re: Dyno numbers 305 For the ones that have kept up with the 305 build I BLOWED it up already. It was 2 tenths slow rnd 1 at the gators. I guess the valve face jammed into the head was reason why. I put a order n at cp today for 2 more pistons. I need a spare just in case. Few weeks I be back together hopefully.

03-17-2014, 10:09 PM	#55
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,637 Likes: 1,083 Liked 7,937 Times in 1,518 Posts	Re: Dyno numbers 305 MR. P billy, what thickness head gasket Did you use ? M.J.

03-25-2014, 09:29 AM	#57
philbilly Member Join Date: Aug 2011 Location: Demossville,KY Posts: 337 Likes: 0 Liked 0 Times in 0 Posts	Re: Dyno numbers 305 My first go around with cp wasn't the best. I had to purchase a couple more pistons. This time I called Darin at Patterson and tht is one good dude. It's been 8 days and pistons are being shipped.

03-26-2014, 09:15 AM	#59
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,371 Likes: 352 Liked 306 Times in 103 Posts	Re: Dyno numbers 305 Phil, Did you find piston/valve clearance problem? In picture you sent me it looked like you had some intake and some ex but not all of either hitting with it being somewhat random I would look at valves see if all same thickness and setting same depth,if they are the same probaly getting valve float with it being kind of random springs may not be set up evenly and have some with less pressure, all that is ok double check actual clearance piston to valve clearance. I know valve broke had head popped off of stem that alot of times is sign of valve float,hitting piston did'nt help head stay on valve,but float will pop off heads of valves stretch and burr keeper grooves,can leave X or * asterick pattern on tip off valve where roller on rocker is beating on it,and timing chain stretched ,valve guides wollared out prematurely are all symptons of valve float. Mike Taylor 3601

03-26-2014, 12:12 PM	#60
philbilly Member Join Date: Aug 2011 Location: Demossville,KY Posts: 337 Likes: 0 Liked 0 Times in 0 Posts	Re: Dyno numbers 305 Mike all the intake valves was hitting. I haven't taken it apart yet. Well short block anyway. I did find a couple sets of 416 cores so I got them parts. At least it isn't to bad I guess. Something's shouldn't be rushed! It isn't the first or last I am sure.