SS carb/throttle body rule

HawkBrosMav · 03-30-2014, 09:22 PM

What's the rule? I know it has to go in same direction as factory but does it matter if it a factory piece.. specifically throttle body..Same size holes is all that matters or do I have to have the part number specific throttle body?

Brad

Mark Yacavone · 03-30-2014, 10:43 PM

Brad, You wouldn't need a specific part number...Just a Ford part with the correct venturi size...unless there is an accepted aftermarket part i.e. Edelbrock for a Qjet or Quick Fuel for a Holley.

HawkBrosMav · 03-31-2014, 11:26 AM

So on the 2010 352 CJ combo. Accufab actually made the 4 hole throttle body.. Ford racing doesn't sell the throttle body anymore and Accufab does, but it has Accufab all over it instead of Ford Racing.. It's also about $70 cheaper than I can find one on ebay that has the Ford markings and I also have a Ron's Racing fuel injection unit that is obviously not the right piece but it has 4 holes and they are the correct size.. would I have to get either of those approved by NHRA because they aren't the actually Ford pieces??

Brad

rawhide · 04-01-2014, 03:51 PM

how much is the cheapest one you have found?

Greg Hill · 04-01-2014, 05:56 PM

Quote:

Originally Posted by HawkBrosMav

So on the 2010 352 CJ combo. Accufab actually made the 4 hole throttle body.. Ford racing doesn't sell the throttle body anymore and Accufab does, but it has Accufab all over it instead of Ford Racing.. It's also about $70 cheaper than I can find one on ebay that has the Ford markings and I also have a Ron's Racing fuel injection unit that is obviously not the right piece but it has 4 holes and they are the correct size.. would I have to get either of those approved by NHRA because they aren't the actually Ford pieces??

Brad

I believe you would need to get it approved just like the quick fuel or edlebrock carbs.

HawkBrosMav · 04-03-2014, 01:20 PM

Rawhide... I must have looked at it wrong I swear when I searched your add the TB was listed at $590 not $550.. I'm sure I'll be in touch soon. I'll know if I am doing this motor in the next month or so

Brad

03-30-2014, 09:22 PM	#1
HawkBrosMav Member Join Date: Apr 2009 Posts: 362 Likes: 6 Liked 302 Times in 73 Posts	SS carb/throttle body rule What's the rule? I know it has to go in same direction as factory but does it matter if it a factory piece.. specifically throttle body..Same size holes is all that matters or do I have to have the part number specific throttle body? Brad

03-30-2014, 10:43 PM	#2
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,815 Likes: 2,904 Liked 5,121 Times in 1,952 Posts	Re: SS carb/throttle body rule Brad, You wouldn't need a specific part number...Just a Ford part with the correct venturi size...unless there is an accepted aftermarket part i.e. Edelbrock for a Qjet or Quick Fuel for a Holley. __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

03-31-2014, 11:26 AM	#3
HawkBrosMav Member Join Date: Apr 2009 Posts: 362 Likes: 6 Liked 302 Times in 73 Posts	Re: SS carb/throttle body rule So on the 2010 352 CJ combo. Accufab actually made the 4 hole throttle body.. Ford racing doesn't sell the throttle body anymore and Accufab does, but it has Accufab all over it instead of Ford Racing.. It's also about $70 cheaper than I can find one on ebay that has the Ford markings and I also have a Ron's Racing fuel injection unit that is obviously not the right piece but it has 4 holes and they are the correct size.. would I have to get either of those approved by NHRA because they aren't the actually Ford pieces?? Brad

04-01-2014, 03:51 PM	#4
rawhide Member Join Date: Feb 2010 Posts: 270 Likes: 1 Liked 7 Times in 5 Posts	Re: SS carb/throttle body rule how much is the cheapest one you have found?

04-03-2014, 01:20 PM	#6
HawkBrosMav Member Join Date: Apr 2009 Posts: 362 Likes: 6 Liked 302 Times in 73 Posts	Re: SS carb/throttle body rule Rawhide... I must have looked at it wrong I swear when I searched your add the TB was listed at $590 not $550.. I'm sure I'll be in touch soon. I'll know if I am doing this motor in the next month or so Brad