|
![]() |
#1 |
Junior Member
Join Date: Aug 2014
Location: Methuen Ma.
Posts: 30
Likes: 0
Liked 1 Time in 1 Post
|
![]()
can anyone tell me the minimum weight for a stock elim n/sa mustang hatch auto ???im thinking we need to shed a few hundred pounds .
|
![]() |
![]() |
![]() |
#2 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,817
Likes: 2,907
Liked 5,124 Times in 1,953 Posts
|
![]() Quote:
Assuming it makes "N" as a 302 Fox body, Probably 14.5 x 215 +170 All this info is available at the top of this site's main page.
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
|
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 2,001
Likes: 64
Liked 780 Times in 194 Posts
|
![]()
Also you can go here: http://www.classracerinfo.com
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Aug 2014
Location: Methuen Ma.
Posts: 30
Likes: 0
Liked 1 Time in 1 Post
|
![]()
the car is a 1991 and according to my calculation s 14.5 x 215. = 3117.50 + 170 = 3287.50 thats the min the car can way with driver ?
|
![]() |
![]() |
![]() |
#5 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,817
Likes: 2,907
Liked 5,124 Times in 1,953 Posts
|
![]()
Yes but they'll round it down to nearest five on your weight sticker.
__________________
"We are lucky we don't get as much Government as we pay for." Will Rogers |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,468
Likes: 1,448
Liked 4,365 Times in 501 Posts
|
![]()
3285lbs with you in the car for N/SA. You can't call the car a 1991 because that is rated at 220hp as opposed to the 1987-1989 mustangs that are rated at 215hp. Don't as me why as they are all the same engine. A 1990-1993 (never go with 1991 or 1993) mustang hatchback can't be run in N. The lowest you can go is L or M with those years because of the 220hp rating, 1993 has a bad cc chamber blueprint of 62.7cc as opposed to the other years' 60.6cc. 1991 has a .044" gasket thickness while all other years have .041".
1988 or 1989 is what everyone classifies their EFI stocker stang as. Last edited by Bobby Fazio; 09-01-2014 at 11:24 AM. |
![]() |
![]() |
![]() |
|
|