Moby Vic!!!!

[Daran Summerton]

I just gave away 5.86, 6.00, and 6.20 9" gear sets for free. It will be interesting to see how fast it can run. Assuming 460hp (1 per ci) and 5000 lbs it should go 12's

[Dave Noll]

Originally Posted by Daran Summerton

I just gave away 5.86, 6.00, and 6.20 9" gear sets for free. It will be interesting to see how fast it can run. Assuming 460hp (1 per ci) and 5000 lbs it should go 12's

7500 RPM ? Not with the stock rods. With Eagle or better rods, yeah. And GOOD springs. And Balance. Oil system is the same as a cleveland so it's not gonna wanna go that high, and, and....................................

[Dwight Southerland]

. . . . and 1 hp/cu in out of that whale is a lot of blubber!!!


Hey, Vic! Why don't you do something really wild? . . like the 400M for Q/SA at a svelte 4590 lbs?

[goinbroke2]

Same carb(1.21)/valves(2.06)/intake and lift is like .406 to .428 compared to the 351M so I think it'd be better.

[Mark Yacavone]

Originally Posted by goinbroke2

Same carb(1.21)/valves(2.06)/intake and lift is like .406 to .428 compared to the 351M so I think it'd be better.

There ya go...351M, as a Landau..U/SA!

[Dwight Southerland]

351 blueprints under 9:1 compression; 400 is 9.7. 50 more cubic inches.

[Dave Noll]

OK. Both the 351M & 400M use the same size 2bbl (1.686/1.21 ) the same heads with the same valves. The 351 has a little over 8 1/2:1 compression & the 400M a little under 9 1/4:1. Yeah the cams are different but with what cam grinders can do these days, I think that's pretty much a wash. (probably wrong).

The 75 & 74 460"s The valves, cams are the same the compression's are similar But as Billy reminded us:

Originally Posted by Billy Nees

Ya know, I really have to ask, how is this combo bogus? All but the 74 can only use the small Motorcraft 4350 carb(700 cfm?)..

& It seems Mr.Graham does pretty well with the combo in Super Stock

[IMG] [/IMG]