FS/H Cobra Jet Body In White Project

George Wright · 01-20-2015, 10:12 PM

Modifications to the transmission tunnel are now complete.

The 5.0L Coyote has 4 overhead camshafts. Jimmy has been busy degreeing the 4 cams and checking piston to valve clearance.

Passenger side cams mocked up and ready to check. I am using Comp Cams VCT lockouts. The Big Stuff 3 does not have the capability to control VCTs/cams. Eventually I would like to try a different aftermarket ECU that could control the cams.

All of the underside cutting and welding is done. All the bars in the back seat area have been welded. Now I am ready to weld in the side bars.

01-20-2015, 10:12 PM	#19
George Wright Member Join Date: Nov 2002 Location: Michigan Posts: 185 Likes: 10 Liked 408 Times in 35 Posts	Re: FS/H CobraJet Body In White Project Modifications to the transmission tunnel are now complete. The 5.0L Coyote has 4 overhead camshafts. Jimmy has been busy degreeing the 4 cams and checking piston to valve clearance. Passenger side cams mocked up and ready to check. I am using Comp Cams VCT lockouts. The Big Stuff 3 does not have the capability to control VCTs/cams. Eventually I would like to try a different aftermarket ECU that could control the cams. All of the underside cutting and welding is done. All the bars in the back seat area have been welded. Now I am ready to weld in the side bars. __________________ George Wright https://9500rpm.com