|
|
![]() |
#1 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
![]()
Pretty sure the distributor is in correctly, but I'll eyeball it again.
Alternator due back today and I'm going to stop and pick up two new O2 sensors just for good measure. The recorder for the PMS should arrive tm...I will then be able to log/review runs to do some intelligent tuning. If all goes as planned I will forgo the TNT Friday at Bowling Green for the SportsNationals and haul the Mustang back to Buffalo Valley Friday evening for some tuning. I'll just roll into BG Saturday morning with the Camaro.
__________________
Rich Taylor I/SA - 321 |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
![]()
It was there all the time...just needed a better meter to read it.
![]() I'm going to say I have been chasing a non-existent problem all week. According to Anderson that line in the screen is for the boost tables only...not sure it would ever read the true barometric pressure. Oh well, with the TPS at 100% and the new O2 sensors I'm ready to try it again.
__________________
Rich Taylor I/SA - 321 |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Mar 2005
Location: Jersey
Posts: 359
Likes: 35
Liked 204 Times in 54 Posts
|
![]()
Good news. Real nice meter. Keep us posted. Get the car to hook just right, and then work the timing a bit. Have fun.
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Jan 2008
Location: Portland, Tn
Posts: 123
Likes: 0
Liked 1 Time in 1 Post
|
![]()
I know your at bg but did u get to test the mustang? I saw your q2 pass and it looked pretty nice ..
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
![]()
Yes, took it to Buffalo Valley Friday nite. Got it running decent, but according to the recorder timing is maxing out at 30 degrees. Have not figured out yet how to bump it up with the controller.
I'll be back at BG in the morning...will not make the same mistake I did first round of the NitroPlate race. ![]()
__________________
Rich Taylor I/SA - 321 |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Nov 2011
Posts: 264
Likes: 42
Liked 61 Times in 25 Posts
|
![]()
How did it do?
|
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
![]()
Only managed a 8.35 Tony with the timing limited to 30 degrees and the starting line slip. I'll have to take it back to BG once I figure out how I somehow locked the timing out.
![]()
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 05-26-2015 at 08:48 PM. |
![]() |
![]() |
![]() |
|
|