Boss Mustang stocker

Bill Diehl · 11-10-2015, 12:19 PM

I am running the Pac 1427 BBC spring/ret/lock package

Mike Taylor 3601 · 11-10-2015, 02:16 PM

looking good,Bill
Mike Taylor 3601

Bill Diehl · 11-10-2015, 05:38 PM

The rest of the sheetmetal parts are down here....

Bill Diehl · 11-10-2015, 05:41 PM

I was going to rebuild the factory headlight assemblies..but being 45 years old and they looked like they were 145 years old, I got these instead.

These things are really nice even if they are offshore clones

Bill Diehl · 11-10-2015, 05:43 PM

and they will bolt on to this....

Bill Diehl · 11-10-2015, 06:04 PM

If it wasn't a cleveland I wouldn't be using these, but it does make for a nice way to restrict the oil, should have posted them a few pics back with the rest of the cam gear

FireSale · 11-11-2015, 01:15 PM

Looks nice. What's your source for sheet metal? I used mostly Dynacorn stuff from CJPony Parts to rebuild my 68 coupe. Floor pans, radiator support, a fender and such. Pretty descent stuff for Korean stamping.

I don't have access to a rule book on this computer but I think you are allowed to cut that cross member for header clearance.

Dale

11-10-2015, 12:19 PM	#1
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker I am running the Pac 1427 BBC spring/ret/lock package __________________ __________________ Bill Diehl B200 C/D STK

11-10-2015, 02:16 PM	#2
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,380 Likes: 368 Liked 317 Times in 108 Posts	Re: Boss Mustang stocker looking good,Bill Mike Taylor 3601

11-10-2015, 05:38 PM	#3
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker The rest of the sheetmetal parts are down here.... __________________ __________________ Bill Diehl B200 C/D STK

11-10-2015, 05:41 PM	#4
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker I was going to rebuild the factory headlight assemblies..but being 45 years old and they looked like they were 145 years old, I got these instead. These things are really nice even if they are offshore clones __________________ __________________ Bill Diehl B200 C/D STK

11-10-2015, 05:43 PM	#5
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker and they will bolt on to this.... __________________ __________________ Bill Diehl B200 C/D STK

11-10-2015, 06:04 PM	#6
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker If it wasn't a cleveland I wouldn't be using these, but it does make for a nice way to restrict the oil, should have posted them a few pics back with the rest of the cam gear __________________ __________________ Bill Diehl B200 C/D STK

11-11-2015, 01:15 PM	#7
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Boss Mustang stocker Looks nice. What's your source for sheet metal? I used mostly Dynacorn stuff from CJPony Parts to rebuild my 68 coupe. Floor pans, radiator support, a fender and such. Pretty descent stuff for Korean stamping. I don't have access to a rule book on this computer but I think you are allowed to cut that cross member for header clearance. Dale __________________ Dale Shearon 68 Mustang 6394