Boss Mustang stocker

[rawhide]

The current Windsor Boss 351 blocks are available in both 9.2" and 9.5" decks. They also have the Cleveland main size.
Roland

[hutt1]

They even have a 9.200 dh with 302 mains.. They are harder to find but available... Talked to the guys at ford the other day..

In the early 90,s when we ran the 351 C in GT/B we had a lot of issues when they really started making power. We went 9.30 at almost 148+ in 1994 with this combo with a G force trans that had to be clutched on all shifts.. So they will make a lot of hp..

I had an entire kit with all the part numbers and all for ford to approve, a Windsor block for the Cleveland then and ford never submitted it to NHRA. I already had NHRA ok with it if Ford had submitted it as a replacement.
Scott

[Bill Diehl]

The Track Boss 351C block that is approved for NHRA Stock/SS is 9.2 deck 2.75 mains, splayed caps and 1 piece rear seal , Siamese bores and updated priority main oiling

They also will be available with optional 302 mains, all bulkheads on all blocks are solid (XE design) all blocks have a provision (material added) for a left hand GM starter (drivers side) all blocks have enough material to bore the cam tunnel to 60mm and, as of now the patterns will be updated for offset or non standard lifter bore locations.

Non standard deck heights will be added at a later date.

[FireSale]

Originally Posted by Bill Diehl

The Track Boss 351C block that is approved for NHRA Stock/SS is 9.2 deck 2.75 mains, splayed caps and 1 piece rear seal , Siamese bores and updated priority main oiling

They also will be available with optional 302 mains, all bulkheads on all blocks are solid (XE design) all blocks have a provision (material added) for a left hand GM starter (drivers side) all blocks have enough material to bore the cam tunnel to 60mm and, as of now the patterns will be updated for offset or non standard lifter bore locations.

Non standard deck heights will be added at a later date.

That photo qualifies as Ford Porn...

EDIT: Info on the creation of this block:
http://351c.net/board/index.php?/top...eveland-block/
The links are interesting.

The index link:
http://351c.net/board/index.php?/forum/126-new-topics/

Dale

[Mike Taylor 3601]

Originally Posted by rawhide

The current Windsor Boss 351 blocks are available in both 9.2" and 9.5" decks. They also have the Cleveland main size.
Roland

I thought we were talking about using production windsor in place of Cleveland,sorry.

Mike taylor 3601