Woodfin's SS GT/TB construction series

Dave Muller · 03-29-2016, 01:25 PM

Do you know a part number for that AN fitting in the carb's fuel inlet? I'd like to get a fitting just like that if I can.

Dragsinger · 03-29-2016, 02:35 PM

Dave,

Dean Oliver sent it with the carb. Deans number 870-830-5470 It is a #8 and he also has them for #6

Dave Muller · 03-29-2016, 03:59 PM

Quote:

Originally Posted by Dragsinger

Dave,

Dean Oliver sent it with the carb. Deans number 870-830-5470 It is a #8 and he also has them for #6

Thanks! I'll check in to that. A -6 ought to be enough for my stocker.

Dragsinger · 04-04-2016, 07:47 PM

My new piston to valve clearance checking tool

FED 387 · 04-04-2016, 09:04 PM

Those neat AN fittings for a 4GC are Fragola part number 491967 for the -8AN and 491950 for the -6AN--those carbs used a 5/8-20 thread pitch on the fuel inlet --FED 387

Dave Muller · 04-05-2016, 01:16 PM

Both Deano and my ruler say it's 7/8-20, not 5/8. But I've got several PNs from different manufacturers now.

FED 387 · 04-05-2016, 02:12 PM

True but some of the carbs do have a 5/8-20 most are 7/8-20----- fittings for both sizes(5/8 or 7/8) in AN configuration are readily available you just have to look not really that difficult to find either------FED 387

03-29-2016, 01:25 PM	#1
Dave Muller Member Join Date: Apr 2014 Location: Mesa, AZ Posts: 497 Likes: 162 Liked 223 Times in 73 Posts	Re: Woodfin's SS GT/TB construction series Do you know a part number for that AN fitting in the carb's fuel inlet? I'd like to get a fitting just like that if I can.

03-29-2016, 02:35 PM	#2
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Woodfin's SS GT/TB construction series Dave, Dean Oliver sent it with the carb. Deans number 870-830-5470 It is a #8 and he also has them for #6 __________________ Larry Woodfin 471W

04-04-2016, 07:47 PM	#4
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Woodfin's SS GT/TB construction series My new piston to valve clearance checking tool Attached Thumbnails __________________ Larry Woodfin 471W

04-04-2016, 09:04 PM	#5
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,428 Likes: 560 Liked 335 Times in 182 Posts	Re: Woodfin's SS GT/TB construction series Those neat AN fittings for a 4GC are Fragola part number 491967 for the -8AN and 491950 for the -6AN--those carbs used a 5/8-20 thread pitch on the fuel inlet --FED 387

04-05-2016, 02:12 PM	#7
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,428 Likes: 560 Liked 335 Times in 182 Posts	Re: Woodfin's SS GT/TB construction series True but some of the carbs do have a 5/8-20 most are 7/8-20----- fittings for both sizes(5/8 or 7/8) in AN configuration are readily available you just have to look not really that difficult to find either------FED 387

04-05-2016, 01:16 PM	#6
Dave Muller Member Join Date: Apr 2014 Location: Mesa, AZ Posts: 497 Likes: 162 Liked 223 Times in 73 Posts	Re: Woodfin's SS GT/TB construction series Both Deano and my ruler say it's 7/8-20, not 5/8. But I've got several PNs from different manufacturers now.