'66 Malibu N/SA - Page 25

Dave Muller · 05-07-2017, 07:28 PM

I spent most of yesterday reworking the inside rear corners of the rear fenderwells. I've got an additional 1/2" plus clearance on each side now. I think that will work okay, if there's an issue I should still be able to get slightly smaller diameter slicks in time for Fontana.

Today I put in the interior:

At this point I consider the build to be essentially complete. I do have to hit the hardware store tomorrow after which I can install the belts, and the numbers still have to go on. But that about does it! Friday night I take it to Wild Horse.

Tim H · 05-07-2017, 07:38 PM

Nice build, thanks for sharing it with us.

Dave Gantz · 05-07-2017, 08:56 PM

Looking great. I've been enjoying following your build. Do you have roll bar padding?

Dave Muller · 05-07-2017, 09:34 PM

Quote:

Originally Posted by Dave Gantz

Looking great. I've been enjoying following your build. Do you have roll bar padding?

Actually, I hadn't thought about it. But no, not yet anyway.

Pistol Pete · 05-07-2017, 10:16 PM

Quote:

Originally Posted by Dave Muller

Actually, I hadn't thought about it. But no, not yet anyway.

Call Mr. Derby City for the padding.
Top notch & custom fit as well.
I highly recommend it, Nice n Neat to boot.

FireSale · 05-08-2017, 01:07 PM

Looks great. I did my wheel wells before my paint. Didn't have to worry about cosmetic damage so I used a torch and body hammer. Heat and beat...

S/ST J718 · 05-09-2017, 04:01 PM

Quote:

Originally Posted by Dave Muller

Wow, now these guys will all think I paid you to write that! But thanks.
.

LOL .... Dave I call it the way I see it...Went I'm at WHP and I see you going rounds race after race .... You may think your a Duck, but that's not the way I see it. Hope to see you Saturday night you can pay me then!!!

Dave Muller · 05-09-2017, 06:48 PM

I'll think I'll do okay once I get it sorted out, but that'll likely take a while.

Pinballer · 05-09-2017, 07:01 PM

Dave, good luck on the testing, this has been a real nice build and we're all anxious to see how it turns out for you. Keep us posted.

BTW: If you let off at half track, you'll still probably be faster than my car right now, but I can handle that.

S/ST J718 · 05-09-2017, 10:25 PM

Quote:

Originally Posted by Dave Muller

I'll think I'll do okay once I get it sorted out, but that'll likely take a while.

I'm sure will not take that long as you have a great starting point, thanks for the thread was very cool watching your progress .

05-07-2017, 07:28 PM	#241
Dave Muller Member Join Date: Apr 2014 Location: Mesa, AZ Posts: 497 Likes: 162 Liked 223 Times in 73 Posts	Re: '66 Malibu N/SA I spent most of yesterday reworking the inside rear corners of the rear fenderwells. I've got an additional 1/2" plus clearance on each side now. I think that will work okay, if there's an issue I should still be able to get slightly smaller diameter slicks in time for Fontana. Today I put in the interior: At this point I consider the build to be essentially complete. I do have to hit the hardware store tomorrow after which I can install the belts, and the numbers still have to go on. But that about does it! Friday night I take it to Wild Horse. Last edited by Dave Muller; 07-08-2017 at 05:25 PM.

05-07-2017, 07:38 PM	#242
Tim H VIP Member Join Date: Jan 2007 Posts: 1,042 Likes: 1,076 Liked 482 Times in 159 Posts	Re: '66 Malibu N/SA Nice build, thanks for sharing it with us.

05-07-2017, 08:56 PM	#243
Dave Gantz Senior Member Join Date: Nov 2005 Location: Verrry South Jersey Posts: 537 Likes: 134 Liked 251 Times in 125 Posts	Re: '66 Malibu N/SA Looking great. I've been enjoying following your build. Do you have roll bar padding?

05-08-2017, 01:07 PM	#246
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: '66 Malibu N/SA Looks great. I did my wheel wells before my paint. Didn't have to worry about cosmetic damage so I used a torch and body hammer. Heat and beat... __________________ Dale Shearon 68 Mustang 6394

05-09-2017, 06:48 PM	#248
Dave Muller Member Join Date: Apr 2014 Location: Mesa, AZ Posts: 497 Likes: 162 Liked 223 Times in 73 Posts	Re: '66 Malibu N/SA I'll think I'll do okay once I get it sorted out, but that'll likely take a while.

05-09-2017, 07:01 PM	#249
Pinballer Member Join Date: Aug 2015 Location: Suburbs of fabulous Lerna IL Posts: 215 Likes: 10 Liked 13 Times in 7 Posts	Re: '66 Malibu N/SA Dave, good luck on the testing, this has been a real nice build and we're all anxious to see how it turns out for you. Keep us posted. BTW: If you let off at half track, you'll still probably be faster than my car right now, but I can handle that. __________________ Brian Saunders Lerna IL '79 AMX T/SA 3790 currently being resurrected