H-I-J '76 Nova re-fit. - Page 15

Nmbr1GMfan · 12-08-2017, 04:45 PM

OK, today is shaping up a little and some sandblasting got done. The nice thing about grease is, it hides stuff, pretty rough but we're gonna jazz it up a bit.

James Perrone · 12-08-2017, 06:30 PM

Your doing a awesome job on this car. Wow

Nmbr1GMfan · 12-08-2017, 11:28 PM

Quote:

Originally Posted by James Perrone

Your doing a awesome job on this car. Wow

Thank you James!

Nmbr1GMfan · 12-08-2017, 11:40 PM

Got some small parts and the rear blasted and coated today. Still had a little snaggle tooth spot on the floor we fixed from when I had to do a quick notch job when we moved the shifter back in a hurry. Painted the bottom floor and firewall with about 4 coats of SEM Hot Rod black, the pictures are of it just tacky so I expect it will dull up just a bit.

Nmbr1GMfan · 12-09-2017, 06:24 PM

Didn't have a full day to work today but we got the ball joints in and the rear built.

Nmbr1GMfan · 12-10-2017, 10:42 AM

Another short day today so here we go. Put the car in the oven yesterday to help with the paint that was still not cured, glad we did, it got into the 40s last night, seems nice and hard now.

Nmbr1GMfan · 12-10-2017, 08:28 PM

Start out with the good stuff, apparently my coil spring compressor has teeth and it DOES bite! Luckily I had some work done before the "incident".

Nmbr1GMfan · 12-10-2017, 10:59 PM

Leaf springs, Caltrac brackets and rear went in first. Then the front subframe and new bushings, a-arms, spindles and springs. Just threw the wheels on to roll it around.

Greg Barsamian · 12-11-2017, 08:59 AM

I bet "Captn" Bill is LOVING seeing his old Ride Restored!

Wish you lived around here, Your work looks OUTSTANDING!
Good Luck with the Project.....

Keep the "Progress Reports" & "Pictures" coming!

Nmbr1GMfan · 12-11-2017, 10:30 AM

Quote:

Originally Posted by Greg Barsamian

I bet "Captn" Bill is LOVING seeing his old Ride Restored!

Wish you lived around here, Your work looks OUTSTANDING!
Good Luck with the Project.....

Keep the "Progress Reports" & "Pictures" coming!

Sent Mr. Bill an e-mail in hopes he will see this thread. Should be able to get back into it in a couple days when the finger stops throbbing to keep the updates coming.

12-08-2017, 04:45 PM	#141
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. OK, today is shaping up a little and some sandblasting got done. The nice thing about grease is, it hides stuff, pretty rough but we're gonna jazz it up a bit. __________________ Todd Greene Last edited by Nmbr1GMfan; 12-08-2017 at 08:13 PM.

12-08-2017, 06:30 PM	#142
James Perrone VIP Member Join Date: Feb 2004 Location: LONG ISLAND N.Y. Posts: 1,673 Likes: 3,361 Liked 1,804 Times in 422 Posts	Re: H-I-J '76 Nova re-fit. Your doing a awesome job on this car. Wow __________________ james perrone 1290 STK

12-08-2017, 11:40 PM	#144
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. Got some small parts and the rear blasted and coated today. Still had a little snaggle tooth spot on the floor we fixed from when I had to do a quick notch job when we moved the shifter back in a hurry. Painted the bottom floor and firewall with about 4 coats of SEM Hot Rod black, the pictures are of it just tacky so I expect it will dull up just a bit. __________________ Todd Greene

12-09-2017, 06:24 PM	#145
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. Didn't have a full day to work today but we got the ball joints in and the rear built. __________________ Todd Greene

12-10-2017, 10:42 AM	#146
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. Another short day today so here we go. Put the car in the oven yesterday to help with the paint that was still not cured, glad we did, it got into the 40s last night, seems nice and hard now. __________________ Todd Greene

12-10-2017, 08:28 PM	#147
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. Start out with the good stuff, apparently my coil spring compressor has teeth and it DOES bite! Luckily I had some work done before the "incident". __________________ Todd Greene

12-10-2017, 10:59 PM	#148
Nmbr1GMfan VIP Member Join Date: Aug 2013 Posts: 1,763 Likes: 1,197 Liked 1,955 Times in 492 Posts	Re: H-I-J '76 Nova re-fit. Leaf springs, Caltrac brackets and rear went in first. Then the front subframe and new bushings, a-arms, spindles and springs. Just threw the wheels on to roll it around. __________________ Todd Greene

12-11-2017, 08:59 AM	#149
Greg Barsamian VIP Member Join Date: Jan 2002 Location: Central Massachusetts Posts: 1,398 Likes: 712 Liked 410 Times in 94 Posts	Re: H-I-J '76 Nova re-fit. I bet "Captn" Bill is LOVING seeing his old Ride Restored! Wish you lived around here, Your work looks OUTSTANDING! Good Luck with the Project..... Keep the "Progress Reports" & "Pictures" coming!