Crankshaft selection for a small block mopar 340

GTX JOHN · 04-16-2018, 03:27 AM

We have run production cranks in our Stock and Superstock stuff with
excellent results for the last 50 years. We do run aftermarket rods....although not the expensive ones (usually Eagle or Manley stuff).

Just mag and particularly inspect the undercut areas of rod journals
carefully as these thing are getting pretty old unless you can find low mileage stuff ( Hint: I have close to 100 Mopar cranks in shop for
around 40 years).
.
$150 Steel
$ 75 Cast

04-16-2018, 03:27 AM	#12
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,734 Likes: 2,803 Liked 2,487 Times in 698 Posts	Re: Crankshaft selection for a small block mopar 340 We have run production cranks in our Stock and Superstock stuff with excellent results for the last 50 years. We do run aftermarket rods....although not the expensive ones (usually Eagle or Manley stuff). Just mag and particularly inspect the undercut areas of rod journals carefully as these thing are getting pretty old unless you can find low mileage stuff ( Hint: I have close to 100 Mopar cranks in shop for around 40 years). . $150 Steel $ 75 Cast __________________ John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 04-16-2018 at 01:52 PM.