Mounting Turbo Action Shifter

GTX JOHN · 04-26-2018, 03:23 PM

I will take pics as soon as I am back from Muscle cars at Strip
Stock/Super Stock on Monday.

Myron Piatek · 04-27-2018, 11:46 AM

I have a Hurst 1/4 stick but made my floor bracket from a piece of channel iron about 2" wide and 1/2" tall, maybe 1/8" thick. (My local Home Depot sells lengths of it. Drilled it to match the shifter mounting pattern and bolted it together with short 1/4" bolts.Nuts were then welded underneath to stay in place when shifter is removed. Then the channel piece was welded to the floor/tunnel in a comfortable location.

04-26-2018, 03:23 PM	#1
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,733 Likes: 2,799 Liked 2,484 Times in 697 Posts	Re: Mounting Turbo Action Shifter I will take pics as soon as I am back from Muscle cars at Strip Stock/Super Stock on Monday. __________________ John Irving 741 Stock 741 Super Stock

04-27-2018, 11:46 AM	#2
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Mounting Turbo Action Shifter I have a Hurst 1/4 stick but made my floor bracket from a piece of channel iron about 2" wide and 1/2" tall, maybe 1/8" thick. (My local Home Depot sells lengths of it. Drilled it to match the shifter mounting pattern and bolted it together with short 1/4" bolts.Nuts were then welded underneath to stay in place when shifter is removed. Then the channel piece was welded to the floor/tunnel in a comfortable location. __________________ LOCOMOTION Racing Last edited by Myron Piatek; 04-27-2018 at 11:50 AM.