Racepak O2 sensor

Glenn Briglio · 05-12-2018, 11:03 AM

Racepak O2 sensor: Is there a replacement for the O2 sensor that comes with a clip to hold the two connectors together. Other than going back to Racepak.Actually just need the clip which I broke.

jimmyparker · 05-12-2018, 02:20 PM

I ran into the same problem, old stand by zip ties was the cure.

Glenn Briglio · 05-13-2018, 07:13 AM

Quote:

Originally Posted by jimmyparker

I ran into the same problem, old stand by zip ties was the cure.

Yeah that's what on it now................not happy with that

Ed Wright · 05-13-2018, 09:13 AM

Quote:

Originally Posted by Glenn Briglio

Racepak O2 sensor: Is there a replacement for the O2 sensor that comes with a clip to hold the two connectors together. Other than going back to Racepak.Actually just need the clip which I broke.

Usually the brand, and a number on the Old one. I found NAPA Auto Parts, if you find an experienced parts guy, can take that info and find you the same exact sensor. Not likely Racepak changed the connector on the sensor.

weedburner · 05-13-2018, 10:58 AM

Back when I swapped my FAST stand alone O2 setup for a Racepak unit, i'm pretty sure both used the same connectors, although I don't remember plugging each in to see.

Here's the O2 sensor...
http://www.lsxtune.com/shop/product_...roducts_id/534

Here's it's mating connector...
http://www.lsxtune.com/shop/product_...roducts_id/678

The whole mating pigtail...
http://www.lsxtune.com/shop/product_...roducts_id/695

Grant

Ed Wright · 05-13-2018, 03:02 PM

Also, all Wideband sensors don't read the same. Learned that on my dyno. I bought a new one, and found it showed leaner air/fuel numbers than the old one. I ordered yet another, put my pickup on the dyno, and made 2 pulls, plugged in the new one, A/F went from 13.0-1 to 13.25-1. Put the old sensor back in, 13.0-1. Ordered yet another new sensor. Back to 13.0-1. Tagged the Lean sensor at ".25 Lean", and kept it for a spare. If I had a car in that was not as rich as I expected, I put the spare in to verify the sensor I was using was not indicating a false lean condition. Leaded fuel does degrade O2 sensors. I always keep a known good spare for my FAST system on my race car. If you buy a spare, I would back-to-back test them to verify they agree. That is why you cannot just tell a guy to tune his car for a given magic number A/F ratio. His sensor may not read just like yours. That's why we test, right? Mine does not make the best power at the same air/fuel ratio with all fuels, either.
Always something, right?

HR9121 · 05-13-2018, 05:34 PM

Quote:

Originally Posted by Ed Wright

Usually the brand, and a number on the Old one. I found NAPA Auto Parts, if you find an experienced parts guy, can take that info and find you the same exact sensor. Not likely Racepak changed the connector on the sensor.

Ed I like how you say "if you can find an experienced parts guy" that in itself is hard to do these days!

Ed Wright · 05-13-2018, 06:49 PM

Quote:

Originally Posted by HR9121

Ed I like how you say "if you can find an experienced parts guy" that in itself is hard to do these days!

It is. Too many kids doing it now, that think they have it all figured out.
Look for some gray hair. LOL

Glenn Briglio · 05-13-2018, 07:00 PM

Number on sensor 258007018

Adger Smith · 05-14-2018, 12:33 AM

Ed,
The part where all fuels don't make the best power at the same A/F ratio is missed by a lot of tuners. Same as the guys that tune with EGT #'s.
I had to shake my head a few times when a customer told me it had to have a certain deg EGT's. If it didn't it wouldn't make power till it did.

05-12-2018, 11:03 AM	#1
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,281 Likes: 1,894 Liked 969 Times in 307 Posts	Racepak O2 sensor Racepak O2 sensor: Is there a replacement for the O2 sensor that comes with a clip to hold the two connectors together. Other than going back to Racepak.Actually just need the clip which I broke. __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.

05-12-2018, 02:20 PM	#2
jimmyparker Member Join Date: Oct 2009 Location: columbus, georgia Posts: 385 Likes: 65 Liked 309 Times in 88 Posts	Re: Racepak O2 sensor I ran into the same problem, old stand by zip ties was the cure.

05-13-2018, 10:58 AM	#5
weedburner Junior Member Join Date: Apr 2016 Posts: 55 Likes: 1 Liked 20 Times in 16 Posts	Re: Racepak O2 sensor Back when I swapped my FAST stand alone O2 setup for a Racepak unit, i'm pretty sure both used the same connectors, although I don't remember plugging each in to see. Here's the O2 sensor... http://www.lsxtune.com/shop/product_...roducts_id/534 Here's it's mating connector... http://www.lsxtune.com/shop/product_...roducts_id/678 The whole mating pigtail... http://www.lsxtune.com/shop/product_...roducts_id/695 Grant

05-13-2018, 03:02 PM	#6
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Racepak O2 sensor Also, all Wideband sensors don't read the same. Learned that on my dyno. I bought a new one, and found it showed leaner air/fuel numbers than the old one. I ordered yet another, put my pickup on the dyno, and made 2 pulls, plugged in the new one, A/F went from 13.0-1 to 13.25-1. Put the old sensor back in, 13.0-1. Ordered yet another new sensor. Back to 13.0-1. Tagged the Lean sensor at ".25 Lean", and kept it for a spare. If I had a car in that was not as rich as I expected, I put the spare in to verify the sensor I was using was not indicating a false lean condition. Leaded fuel does degrade O2 sensors. I always keep a known good spare for my FAST system on my race car. If you buy a spare, I would back-to-back test them to verify they agree. That is why you cannot just tell a guy to tune his car for a given magic number A/F ratio. His sensor may not read just like yours. That's why we test, right? Mine does not make the best power at the same air/fuel ratio with all fuels, either. Always something, right? __________________ Ed Wright 4156 SS/JA

05-13-2018, 07:00 PM	#9
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,281 Likes: 1,894 Liked 969 Times in 307 Posts	Re: Racepak O2 sensor Number on sensor 258007018 __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.

05-14-2018, 12:33 AM	#10
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,446 Likes: 575 Liked 880 Times in 311 Posts	Re: Racepak O2 sensor Ed, The part where all fuels don't make the best power at the same A/F ratio is missed by a lot of tuners. Same as the guys that tune with EGT #'s. I had to shake my head a few times when a customer told me it had to have a certain deg EGT's. If it didn't it wouldn't make power till it did. __________________ Adger Smith (Former SS)