|
|
![]() |
#1 |
Senior Member
Join Date: Sep 2010
Location: Houston,Texas
Posts: 838
Likes: 3,754
Liked 692 Times in 205 Posts
|
![]()
Todd the car is a piece of art. Attention to detail is breath taking.
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Thanks Nick, Much appreciated. It's been a great ride so far. The real fun will be next year when we see how good we are at making this thing haul *****!
__________________
Todd Greene |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Been a rough week at work so far and I haven't gotten anything done. Autumn has been running parts around after school and I finally got in the shop for a couple hours today. Made the last ground strap, the starter cable, and it actually turned over for a second so that works. Started working on the brake pressure gauge so I can get the last flex hose made this week to button up the brake system.
![]() ![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
How does a 20 minute job take 3 hours! My wife simply calls it... car time.
![]() ![]() Made a thread chase to work on the wheel stud threads, got them all straightened out. Put a new set of studs in and finally got the rear back together. Brakes are on, brake lines are on, pressure gauge is mounted and plumbed too. We started to run the fuel lines for the final time too. Autumn worked on the tank brackets and of coarse drilling and tapping the radiator for no other reason than why not change EVERYTHING since that is our current theme. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Sep 2007
Posts: 210
Likes: 452
Liked 196 Times in 29 Posts
|
![]()
Hey Todd,
When you do it RIGHT the first time, you will never have to touch it again, no matter what the project is. Obviously, you and your daughter are doing it RIGHT..... Congrats on the build, it is Very Special!!!! Gary Merrick 3522 Stock |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Thank you Gary.
__________________
Todd Greene |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
On the ground today, took it outside to turn it around, just can't get the door open enough against the wall to get the belts in and a couple wiring bits. Making fuel lines and getting mounting holes drilled for the fuel tank. Also wrapping some fuel lines so no chafing.
![]() ![]() ![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
|
|