|
04-03-2019, 05:07 PM | #1 |
Member
Join Date: Dec 2013
Location: Santa Fe TEXAS
Posts: 108
Likes: 2
Liked 57 Times in 15 Posts
|
Hydraulic lifter conversion recommended valve lash
Just converted my old Shubecks from hydraulic to solid. Still running a hydraulic profile cam. Bullet brand cam
The question is what lash should I set it at now? I was between .0 and .003 before
__________________
Overkill is Under-rated |
04-03-2019, 06:06 PM | #2 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,331
Likes: 3,337
Liked 7,198 Times in 1,610 Posts
|
Re: Hydraulic lifter conversion recommended valve lash
.006 and .010 works for me!
__________________
Billy Nees 1188 STK, SS I'm OK..........it's everybody else. |
04-03-2019, 08:39 PM | #3 |
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 570
Likes: 116
Liked 280 Times in 139 Posts
|
Re: Hydraulic lifter conversion recommended valve lash
What was the open spring press.with the Shubecks?.If it was 400+you will not be able to run that with a uncoated solid lifter on the same cam.As far as lash .006-.008. gsa612
|
04-04-2019, 08:59 AM | #4 |
Member
Join Date: Mar 2011
Posts: 186
Likes: 0
Liked 28 Times in 15 Posts
|
Re: Hydraulic lifter conversion recommended valve lash
Call John Partridge
|
|
|