Dumbo The Flying Elephant - Page 4

Larry Hill · 04-10-2019, 07:27 AM

We took three days off to drive 1600 miles and see some old friends, do a little work, and learn about the gen III hemi. Now it's back to work.

Larry Hill · 04-11-2019, 05:40 PM

Got some much needed interior parts at the semi local bone yard. It was only a 125 mile round trip. Ah the perks of living in the country

A friend of mine went to the Holley school for FI and now he thinks the Holley stuff could, in a pinch, run the space station. I'm going to need a catch-can for my brain.

Larry Hill · 04-14-2019, 09:09 AM

Playing with the heads on the flow bench today if I can get all the tooling to work..

Dan where do you index the plugs on a Hemi?

Larry Hill · 04-17-2019, 08:10 AM

Only had to make a few parts to get heads on the flow bench. I dont know how good they will run but the new castings are pretty consistent port to port. I did pick up some flow on the exhaust side. I got the header flange to match the port better.

Larry Hill · 04-17-2019, 09:16 PM

Tomorrow I will be playing with alcohol. I will check all the runners and chamber volumes for correct cc. Now is the time to get it right. That way in tear down I can be fearless because it will comply with the rules. Everyone knows that almost right is still wrong. Not to be confused with "The Daily Ledger".

Dyno · 04-17-2019, 09:50 PM

Larry, where can we get a good set of headers? Picked up 23 HP today and never fired the car up yet! What you going to use for spark plugs?

Larry Hill · 04-18-2019, 07:49 AM

I have that info in shop, I will text to you. I have set of Kooks SS and MR2 headers, I will keep the best one and sell the other one.

I know the feeling 392 @ 400 from MoPar, NHRA adjustment before first run 392 / 400 now 392 @ 430

Is it an over kill to have Kirke racing seats with a "Rich Corinthian Leather" seat cover? Just asking!

Kirk Morgan · 04-18-2019, 07:06 PM

Not if you are Ricardo Montalban.

Larry Hill · 04-19-2019, 08:04 AM

Pored alcohol all day and only lost 1/2 a qt. The heads are legal right out of the box. The runners are good and the chamber is big 5 to 6 cc. I will run it that way and then recheck before we make an adjustment.

Does anyone how much to cut to reduce chamber size by 1 cc?

Thanks

pmrphil · 04-19-2019, 08:36 AM

Normally, .006 per cc is fairly close.

04-10-2019, 07:27 AM	#31
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant We took three days off to drive 1600 miles and see some old friends, do a little work, and learn about the gen III hemi. Now it's back to work. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-11-2019, 05:40 PM	#32
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant Got some much needed interior parts at the semi local bone yard. It was only a 125 mile round trip. Ah the perks of living in the country A friend of mine went to the Holley school for FI and now he thinks the Holley stuff could, in a pinch, run the space station. I'm going to need a catch-can for my brain. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-14-2019, 09:09 AM	#33
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant Playing with the heads on the flow bench today if I can get all the tooling to work.. Dan where do you index the plugs on a Hemi? __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-17-2019, 08:10 AM	#34
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant Only had to make a few parts to get heads on the flow bench. I dont know how good they will run but the new castings are pretty consistent port to port. I did pick up some flow on the exhaust side. I got the header flange to match the port better. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-17-2019, 09:16 PM	#35
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant Tomorrow I will be playing with alcohol. I will check all the runners and chamber volumes for correct cc. Now is the time to get it right. That way in tear down I can be fearless because it will comply with the rules. Everyone knows that almost right is still wrong. Not to be confused with "The Daily Ledger". __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-17-2019, 09:50 PM	#36
Dyno Senior Member Join Date: Dec 2002 Posts: 916 Likes: 1,137 Liked 685 Times in 204 Posts	Re: Dumbo The Flying Elephant Larry, where can we get a good set of headers? Picked up 23 HP today and never fired the car up yet! What you going to use for spark plugs?

04-18-2019, 07:49 AM	#37
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant I have that info in shop, I will text to you. I have set of Kooks SS and MR2 headers, I will keep the best one and sell the other one. I know the feeling 392 @ 400 from MoPar, NHRA adjustment before first run 392 / 400 now 392 @ 430 Is it an over kill to have Kirke racing seats with a "Rich Corinthian Leather" seat cover? Just asking! __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-18-2019, 07:06 PM	#38
Kirk Morgan Member Join Date: Jan 2009 Posts: 230 Likes: 1 Liked 80 Times in 44 Posts	Re: Dumbo The Flying Elephant Not if you are Ricardo Montalban.

04-19-2019, 08:04 AM	#39
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,638 Likes: 1,929 Liked 10,702 Times in 2,228 Posts	Re: Dumbo The Flying Elephant Pored alcohol all day and only lost 1/2 a qt. The heads are legal right out of the box. The runners are good and the chamber is big 5 to 6 cc. I will run it that way and then recheck before we make an adjustment. Does anyone how much to cut to reduce chamber size by 1 cc? Thanks __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

04-19-2019, 08:36 AM	#40
pmrphil Member Join Date: Aug 2010 Location: CT Posts: 457 Likes: 1,801 Liked 347 Times in 151 Posts	Re: Dumbo The Flying Elephant Normally, .006 per cc is fairly close. __________________ Phil Molski PMR Performance S/C 1623