Fuel in intake

GallopinGhost · 06-07-2019, 10:11 AM

It made a huge difference in the idle. from what I see, the first gasket blocked the source of manifold vacuum that feeds the PV. I think the PV was opening during idle. At least that is my new theory. Spark plugs are now dry as well.

Greg Reimer 7376 · 06-08-2019, 10:28 AM

Make sure you have some sort of 4 hole gasket or something else, like a 4 hole thin spacer, to keep a base plate to bowl screw from getting loose and backing out and falling into the engine through the intake! Holleys do that.Could save you an engine.

GallopinGhost · 06-08-2019, 09:09 PM

Thanks Greg. Good point. My theory #2 didn't pan out. Although I've seen fuel stains where there shouldn't be any, so trying a few things. Pretty annoyed with this carb as it's fresh from one of the name gurus, but I guess it's a good training experience for me.

GallopinGhost · 06-09-2019, 12:21 PM

I think I've fixed this issue. I had thought the PV was opening because of the base gaskets. Well I found that fuel was collecting in the vacuum space in the body behind the PV, and was being pulled in thru the vacuum port thru the baseplate. Gaskets were leaking bad on both ends. I re-surfaced both ends of the body where the fuel bowls go. Amazing how bad a shape they were in once I started working on them. I will never build a carb without doing this. The vacuum space is dry on both ends now and spark plugs are also dry. Still a little fuel in the intake, not going to worry any more about that. I'll see how it runs. I won't mention who built this carb, but he was recommended in a thread I started here. Stevie Wonder could have diagnosed this problem. And thanks to all that helped. On to the next problem......

GallopinGhost · 06-10-2019, 02:20 PM

Thought I should add this. I talked to the carb guy today, he apologized for how things went and offered to do another carb on his nickle. Can't ask for a better conclusion than that.

Larry Hill · 06-10-2019, 02:58 PM

Raw fuel through the vacuum port, I'm glad you found it.

Duane Eiskant II · 06-10-2019, 03:05 PM

When i worked in the carb shop at AED in Richmond Va every carb we did we surfaced the ends of the body. Brand new castings from Holley are crap out of the box.

06-07-2019, 10:11 AM	#1
GallopinGhost Member Join Date: Jun 2010 Location: VA Posts: 230 Likes: 24 Liked 21 Times in 13 Posts	Re: Fuel in intake It made a huge difference in the idle. from what I see, the first gasket blocked the source of manifold vacuum that feeds the PV. I think the PV was opening during idle. At least that is my new theory. Spark plugs are now dry as well. __________________ Brian Carpenter Stock 1358

06-08-2019, 09:09 PM	#3
GallopinGhost Member Join Date: Jun 2010 Location: VA Posts: 230 Likes: 24 Liked 21 Times in 13 Posts	Re: Fuel in intake Thanks Greg. Good point. My theory #2 didn't pan out. Although I've seen fuel stains where there shouldn't be any, so trying a few things. Pretty annoyed with this carb as it's fresh from one of the name gurus, but I guess it's a good training experience for me. __________________ Brian Carpenter Stock 1358

06-09-2019, 12:21 PM	#4
GallopinGhost Member Join Date: Jun 2010 Location: VA Posts: 230 Likes: 24 Liked 21 Times in 13 Posts	Re: Fuel in intake I think I've fixed this issue. I had thought the PV was opening because of the base gaskets. Well I found that fuel was collecting in the vacuum space in the body behind the PV, and was being pulled in thru the vacuum port thru the baseplate. Gaskets were leaking bad on both ends. I re-surfaced both ends of the body where the fuel bowls go. Amazing how bad a shape they were in once I started working on them. I will never build a carb without doing this. The vacuum space is dry on both ends now and spark plugs are also dry. Still a little fuel in the intake, not going to worry any more about that. I'll see how it runs. I won't mention who built this carb, but he was recommended in a thread I started here. Stevie Wonder could have diagnosed this problem. And thanks to all that helped. On to the next problem...... Attached Thumbnails __________________ Brian Carpenter Stock 1358 Last edited by GallopinGhost; 06-10-2019 at 07:24 AM.

06-10-2019, 02:20 PM	#5
GallopinGhost Member Join Date: Jun 2010 Location: VA Posts: 230 Likes: 24 Liked 21 Times in 13 Posts	Re: Fuel in intake Thought I should add this. I talked to the carb guy today, he apologized for how things went and offered to do another carb on his nickle. Can't ask for a better conclusion than that. __________________ Brian Carpenter Stock 1358

06-10-2019, 02:58 PM	#6
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,681 Likes: 1,993 Liked 11,007 Times in 2,263 Posts	Re: Fuel in intake Raw fuel through the vacuum port, I'm glad you found it. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

06-08-2019, 10:28 AM	#2
Greg Reimer 7376 VIP Member Join Date: Nov 2008 Location: Glendora,Calif. Posts: 1,137 Likes: 172 Liked 719 Times in 220 Posts	Re: Fuel in intake Make sure you have some sort of 4 hole gasket or something else, like a 4 hole thin spacer, to keep a base plate to bowl screw from getting loose and backing out and falling into the engine through the intake! Holleys do that.Could save you an engine.

06-10-2019, 03:05 PM	#7
Duane Eiskant II Senior Member Join Date: Dec 2001 Location: Alexandria, Va Posts: 501 Likes: 262 Liked 57 Times in 33 Posts	Re: Fuel in intake When i worked in the carb shop at AED in Richmond Va every carb we did we surfaced the ends of the body. Brand new castings from Holley are crap out of the box. __________________ Duane Eiskant 1354 Stock/Super Stock