|
![]() |
#11 |
Junior Member
Join Date: Feb 2019
Posts: 90
Likes: 9
Liked 57 Times in 24 Posts
|
![]()
I might be misunderstaning but how did you test
With the light. The input is taken to ground. Or did you mean you tested the switch only . I would make A long jumper and temp short it to the battery neg post Once removed the racepak led should start flashing (recording) If it doesn't start recording I would check the 12v and neg wires Going into the recorder. The simple things are always the hardest to find. Lol |
![]() |
![]() |
Liked |
|
|