Dumbo The Flying Elephant - Page 25

Larry Hill · 11-05-2019, 01:18 PM

Yes

Larry Hill · 11-11-2019, 01:46 PM

Sometimes plans change. I have fought with my Ill fitting CSR case shield the last time. It does not fit the block, bolt holes are off and will not fit the top of the case. I will fit a TCI one to the car. Now if I can only find my big hammer.

Dyno · 11-11-2019, 06:31 PM

GREAT.! CSR was supposed to ship mine today for my 904. The CSR shield on my 727 case fit perfect. I'll report how it fits.

Larry Hill · 11-12-2019, 08:56 AM

I will post a picture of my CSR shield.

The hammer job is done. A little paint will accent the Hammered Look.

Frank Castros · 11-12-2019, 08:40 PM

Fitted patina?

Jeff Stout · 11-12-2019, 10:26 PM

Quote:

Originally Posted by Larry Hill

I will post a picture of my CSR shield.

The hammer job is done. A little paint will accent the Hammered Look.

Swing press cover up

Larry Hill · 11-13-2019, 05:37 PM

I'm not covering up anything. My goal is to be able to fix car between rounds if something goes wrong. In the rush to get to Indy It was install it and revisit this winter.

Completely off subject Jimmy, The Country Dog, is up here deer hunting. Each year Jimmy does a shrimp boil. This year beside the usual family and friends we had Bill Skillman this years Super Car champ. Fun was had by all

Larry Hill · 11-26-2019, 05:47 PM

I got the shields in place, kind of a struggle but it is well worth it.

Jeff never heard it called a swing press but I like it.

All bolts start and can be tightened finger tight. I'm hoping to be able to change converters in less than I hour. Trans change will take a little longer.

340Cuda · 11-26-2019, 08:13 PM

So did you end up using the TCI shield or the CSR?

Jeff Stout · 11-26-2019, 08:36 PM

Quote:

Originally Posted by Larry Hill

I got the shields in place, kind of a struggle but it is well worth it.

Jeff never heard it called a swing press but I like it.

All bolts start and can be tightened finger tight. I'm hoping to be able to change converters in less than I hour. Trans change will take a little longer.
I will get Patsy to post a picture or two.

I here people are still waiting for there CSR stuff since July, I bet it will take some "doing" to get it installed.

If a swing press won't fix it then get the gas axe out, it fixes everything. Some old boy in Missouri told me about these 2 tools

11-05-2019, 01:18 PM	#241
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,626 Likes: 1,916 Liked 10,674 Times in 2,219 Posts	Re: Dumbo The Flying Elephant Yes __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

11-11-2019, 01:46 PM	#242
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,626 Likes: 1,916 Liked 10,674 Times in 2,219 Posts	Re: Dumbo The Flying Elephant Sometimes plans change. I have fought with my Ill fitting CSR case shield the last time. It does not fit the block, bolt holes are off and will not fit the top of the case. I will fit a TCI one to the car. Now if I can only find my big hammer. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

11-11-2019, 06:31 PM	#243
Dyno Senior Member Join Date: Dec 2002 Posts: 915 Likes: 1,127 Liked 680 Times in 203 Posts	Re: Dumbo The Flying Elephant GREAT.! CSR was supposed to ship mine today for my 904. The CSR shield on my 727 case fit perfect. I'll report how it fits.

11-12-2019, 08:56 AM	#244
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,626 Likes: 1,916 Liked 10,674 Times in 2,219 Posts	Re: Dumbo The Flying Elephant I will post a picture of my CSR shield. The hammer job is done. A little paint will accent the Hammered Look. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 11-27-2019 at 11:03 AM.

11-12-2019, 08:40 PM	#245
Frank Castros VIP Member Join Date: Nov 2001 Location: The Lowcountry. Posts: 2,958 Likes: 2,546 Liked 2,623 Times in 950 Posts	Re: Dumbo The Flying Elephant Fitted patina?

11-13-2019, 05:37 PM	#247
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,626 Likes: 1,916 Liked 10,674 Times in 2,219 Posts	Re: Dumbo The Flying Elephant I'm not covering up anything. My goal is to be able to fix car between rounds if something goes wrong. In the rush to get to Indy It was install it and revisit this winter. Completely off subject Jimmy, The Country Dog, is up here deer hunting. Each year Jimmy does a shrimp boil. This year beside the usual family and friends we had Bill Skillman this years Super Car champ. Fun was had by all __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

11-26-2019, 05:47 PM	#248
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,626 Likes: 1,916 Liked 10,674 Times in 2,219 Posts	Re: Dumbo The Flying Elephant I got the shields in place, kind of a struggle but it is well worth it. Jeff never heard it called a swing press but I like it. All bolts start and can be tightened finger tight. I'm hoping to be able to change converters in less than I hour. Trans change will take a little longer. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 01-08-2020 at 09:08 AM.

11-26-2019, 08:13 PM	#249
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,664 Likes: 3,833 Liked 764 Times in 332 Posts	Re: Dumbo The Flying Elephant So did you end up using the TCI shield or the CSR?