Dumbo The Flying Elephant - Page 29

Larry Hill · 01-12-2020, 04:28 PM

Got new rod bearings installed at the clearance I want. Checked rod bolts for correct stretch. Now onto the mains

Larry Hill · 01-18-2020, 08:59 PM

Put longer main studs in and it increased thread count in the block by two. It took away that mushy feeling when going to the final number on torque.

HP HUNTER · 01-19-2020, 10:58 AM

Quote:

Originally Posted by Larry Hill

Put longer main studs in and it increased thread count in the block by two. It took away that mushy feeling when going to the final number on torque.

Did that change the housing bore?

Larry Hill · 01-19-2020, 02:40 PM

I will let you know in a few minutes, re lubing the studs now.

Larry Hill · 01-19-2020, 03:28 PM

It changed #1 and #5 approximately .0003 smaller, the rest no change. #2, 3, and 4 are four bolt mains, 1 and 5 are two bolt mains. All mains are cross bolted. I will scotch bright back side of bearings to try to regain lost clearance. Whatever it takes, the solid feeling is worth it when torquing.

The scotch bright fixed it

nolongerracing · 01-21-2020, 02:02 PM

Quote:

Originally Posted by Larry Hill

It changed #1 and #5 approximately .0003 smaller, the rest no change. #2, 3, and 4 are four bolt mains, 1 and 5 are two bolt mains. All mains are cross bolted. I will scotch bright back side of bearings to try to regain lost clearance. Whatever it takes, the solid feeling is worth it when torquing.

The scotch bright fixed it

Will you be using "full groove" main bearings?

Larry Hill · 01-21-2020, 06:10 PM

Not full grooved mains

Larry Hill · 01-24-2020, 08:34 AM

I had to seek out a very experienced engine builders advice on of all things how to measure something. He got me going down the right path in a matter of minutes. The problem was, I had not applied the K.I.S.S. method of problem solving, you know Keep It Simple Stu....

It is so great that most if not all of us are willing to help each other. I did not ask him what the latest speed secret is because I'm still trying to accomplish the first one he shared with me. The straight and round tip!

Back to work.

340Cuda · 01-24-2020, 05:47 PM

Quote:

Originally Posted by Larry Hill

I'm working on it daily.

From your first post from this thread. It has been the truth.

I admire everything about what your are doing except for how much it makes me feel like a slacker!

Thanks for sharing,
Bill

Larry Hill · 01-25-2020, 09:47 AM

Im retired so my hobby fills most of my day. Racing is venue that us old people can still be somewhat competitive and I like that. I enjoy trying to catch up with all the great engine builders that have customers competing in the same class that I choose to run.

01-12-2020, 04:28 PM	#281
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant Got new rod bearings installed at the clearance I want. Checked rod bolts for correct stretch. Now onto the mains __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-18-2020, 08:59 PM	#282
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant Put longer main studs in and it increased thread count in the block by two. It took away that mushy feeling when going to the final number on torque. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-19-2020, 02:40 PM	#284
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant I will let you know in a few minutes, re lubing the studs now. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-19-2020, 03:28 PM	#285
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant It changed #1 and #5 approximately .0003 smaller, the rest no change. #2, 3, and 4 are four bolt mains, 1 and 5 are two bolt mains. All mains are cross bolted. I will scotch bright back side of bearings to try to regain lost clearance. Whatever it takes, the solid feeling is worth it when torquing. The scotch bright fixed it __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 01-19-2020 at 04:40 PM. Reason: scotch bright fix

01-21-2020, 06:10 PM	#287
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant Not full grooved mains __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

01-24-2020, 08:34 AM	#288
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant I had to seek out a very experienced engine builders advice on of all things how to measure something. He got me going down the right path in a matter of minutes. The problem was, I had not applied the K.I.S.S. method of problem solving, you know Keep It Simple Stu.... It is so great that most if not all of us are willing to help each other. I did not ask him what the latest speed secret is because I'm still trying to accomplish the first one he shared with me. The straight and round tip! Back to work. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817 Last edited by Larry Hill; 01-24-2020 at 08:43 AM.

01-25-2020, 09:47 AM	#290
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,633 Likes: 1,927 Liked 10,687 Times in 2,225 Posts	Re: Dumbo The Flying Elephant Im retired so my hobby fills most of my day. Racing is venue that us old people can still be somewhat competitive and I like that. I enjoy trying to catch up with all the great engine builders that have customers competing in the same class that I choose to run. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817