8.50 index build - Page 6

Mark Yacavone · 10-18-2021, 11:10 PM

Quote:

Originally Posted by Todd Geisler

We have about 4 tracks in the area they will run 8:50 10:00 and 11:50 indexes. Heads up pro tree. Atco, Cecil, and maple grove are some tracks doing it. Also pro dial is becoming a popular class. If you notice all the indexes are right where the brakes for more rules are i.e. 1150 is the cut off for a roll bar. 10 flat is a cut off for a lot of the 9.99 Certs, and 850 is the cut off of many other certifications i.e. roll cage etc.
most of these classes do not include electronics either, I run the 1150 index with my street strip car and I know we are not allowed throttle stops or delay boxes. The class started out was supposed to be all streetcar as usual most of these classes have morphed into something a little different

^^^This^^^

I race at Cecil during the Street Car Shooutout monthly series which runs April through November.[/QUOTE]
Thanks. I was just wondering what else that car could be used for. Of course, I don't follow much, besides NHRA S/SS and a bit of Comp now that we have a team member involved ;-)

Todd Geisler · 10-19-2021, 07:36 AM

Quote:

Originally Posted by Mark Yacavone

^^^This^^^

I race at Cecil during the Street Car Shooutout monthly series which runs April through November.

Thanks. I was just wondering what else that car could be used for. Of course, I don't follow much, besides NHRA S/SS and a bit of Comp now that we have a team member involved ;-)[/QUOTE]

This car would be legal for various classes like brackets, Top Sportsman, index, X275...

Cage will cert for 25.2 (good to 6.0 at 3000 lbs) as well as 25.3 (good to 6.50 at 3600 lbs).

Wayne Scraba · 10-19-2021, 10:14 AM

What a great car....and your workmanship is fabulous! 🤩

Todd Geisler · 10-19-2021, 04:12 PM

The next project was to build headers. Did everything I could to get out of having to build them myself, but in the end I had to force myself to do it. Hated every minute of it except the welding.

One side tacked in place...

Simple fixture I made to hole the collectors in place.

Todd Geisler · 10-19-2021, 04:14 PM

Passenger side...

Todd Geisler · 10-19-2021, 04:16 PM

Welding time...

Greg West · 10-19-2021, 04:30 PM

Beautiful workmanship. Just curious what brand of welder you use at home?

Todd Geisler · 10-19-2021, 04:35 PM

Quote:

Originally Posted by Greg West

Beautiful workmanship. Just curious what brand of welder you use at home?

Thank you.

I have an Everlast PowerTig 255ext water cooled. I took it to the shop when doing the tube work so everything on the car was done with this welder.

FireSale · 10-20-2021, 12:52 PM

T.I.G.H.T I would not like to be your starter.

Glenn Briglio · 10-20-2021, 01:40 PM

Did you make those collectors ?

10-19-2021, 10:14 AM	#53
Wayne Scraba Member Join Date: Mar 2002 Location: Canada Posts: 152 Likes: 375 Liked 186 Times in 48 Posts	Re: 8.50 index build What a great car....and your workmanship is fabulous! 🤩

10-19-2021, 04:12 PM	#54
Todd Geisler Member Join Date: Feb 2002 Posts: 328 Likes: 64 Liked 345 Times in 149 Posts	Re: 8.50 index build The next project was to build headers. Did everything I could to get out of having to build them myself, but in the end I had to force myself to do it. Hated every minute of it except the welding. One side tacked in place... Simple fixture I made to hole the collectors in place.

10-19-2021, 04:14 PM	#55
Todd Geisler Member Join Date: Feb 2002 Posts: 328 Likes: 64 Liked 345 Times in 149 Posts	Re: 8.50 index build Passenger side...

10-19-2021, 04:16 PM	#56
Todd Geisler Member Join Date: Feb 2002 Posts: 328 Likes: 64 Liked 345 Times in 149 Posts	Re: 8.50 index build Welding time...

10-19-2021, 04:30 PM	#57
Greg West Junior Member Join Date: Jul 2016 Posts: 63 Likes: 26 Liked 52 Times in 22 Posts	Re: 8.50 index build Beautiful workmanship. Just curious what brand of welder you use at home?

10-20-2021, 12:52 PM	#59
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: 8.50 index build T.I.G.H.T I would not like to be your starter. __________________ Dale Shearon 68 Mustang 6394

10-20-2021, 01:40 PM	#60
Glenn Briglio VIP Member Join Date: Nov 2002 Location: Massapequa Park,NY Posts: 1,281 Likes: 1,895 Liked 969 Times in 307 Posts	Re: 8.50 index build Did you make those collectors ? __________________ 1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop.