|
|
07-24-2022, 09:39 PM
|
#11 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
With the coil harnesses done it was time to move on to the engine harness. So first up was to work on the harness from the ECU to the firewall mil-spec connector. Once the wires were run, I metered the wires end to end to verify the pin outs on both ends.
     
|
|
|
| Liked |
|
|
Threaded Mode