|
|
![]() |
#1 |
Member
Join Date: Jun 2007
Location: NJ
Posts: 351
Likes: 62
Liked 126 Times in 61 Posts
|
![]()
A switch on the shifter to retard the timing back in the modified days.
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Jun 2007
Location: Northern New Jersey suburbs
Posts: 2,315
Likes: 25
Liked 544 Times in 213 Posts
|
![]()
Early 1980's trying to slow my Camaro down for S/ST I tried retarding the timing after the shift....had an MSD retard box and had them send me chips
Toggle switch on the shifter Flat top SS piston short block.....thin wall pins My best engine could go 10.40's... Last TT at Etown points race.....flip switch and a couple seconds later.....BOOM.....Pin broke, piston turned sideways ! Was it a co-incidence? Thin wall pins were known to fail but retarding the timing too much was a bad idea......I believe..... I just threw those chips out a few weeks ago !!
__________________
Rich Biebel S/C 1479 Stock 147R |
![]() |
![]() |
Liked |
![]() |
|
|