1979 C-10 Shop/Race Truck Build

HP HUNTER · 10-11-2023, 10:37 AM

So I started my 350 build, .060 over 2 bolt 010 block, I did some work to the factory cast crank which ended up @ 3.483 stroke, I put a 6 inch rod in there with a + 6 cc dome Mahle piston, my Fuelie heads came in at 74 CCs which gave 10.8 compression. My solid lifter cam was .528 lift @ the valve with 264 @ .050 duration on both sides, 108 lobe separation. I used a Performer RPM intake with a 750 Holley, the Moroso pan was modified.

10-11-2023, 10:37 AM	#15
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 656 Likes: 82 Liked 372 Times in 129 Posts	Re: 1979 C-10 Shop/Race Truck Build So I started my 350 build, .060 over 2 bolt 010 block, I did some work to the factory cast crank which ended up @ 3.483 stroke, I put a 6 inch rod in there with a + 6 cc dome Mahle piston, my Fuelie heads came in at 74 CCs which gave 10.8 compression. My solid lifter cam was .528 lift @ the valve with 264 @ .050 duration on both sides, 108 lobe separation. I used a Performer RPM intake with a 750 Holley, the Moroso pan was modified. Last edited by HP HUNTER; 10-11-2023 at 07:38 PM.