Small runner intake gaskets

Ed McLawhorn Jr. · 01-16-2025, 03:31 PM

Quote:

Originally Posted by Dirk Olson

Send a gasket that you have fitted to your head to Cometic and they will reproduce that gasket with your P/N on it.

Dirk

Thanks Dirk. I had a friend call this afternoon and suggested same thing. That?s what he ended up doing.

shoebox racer · 01-18-2025, 09:21 PM

I might have something for you, I sent a private message with my phone number.

Mike Parmenter

Kevin Panzino · 01-24-2025, 09:51 AM

Ditto on cometic cutting a gasket for you with your own part number.
Matches perfectly if you do your homework and send either a detailed cad drawing or a perfect template.
However, unless anything has changed I wasn?t at all happy with the gasket material they use. It?s quite hard and doesn?t compress very well. Given that there is normally a slight variation in the angle between head and manifold no matter how careful you are with your angle mill calcs, measurements and execution you can wind up with coolant weepers down into the galley you won?t see. Plenty or rtv around the coolant passages is a must!

Kp

Jrh5220 · 01-25-2025, 06:20 PM

You can make your own with 1290 fel pro.

STK1217 · 01-27-2025, 07:30 PM

MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ?

Ed McLawhorn Jr. · 01-27-2025, 11:03 PM

Quote:

Originally Posted by STK1217

MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ?

Thanks.

Jeff Stout · 01-28-2025, 12:21 PM

Ed, I bought a shop out and have several sbc gaskets from different companies. I will look today for any. The 1.8x1.92 is approximate size?

01-18-2025, 09:21 PM	#2
shoebox racer Junior Member Join Date: Aug 2004 Posts: 12 Likes: 2 Liked 2 Times in 2 Posts	Re: Small runner intake gaskets I might have something for you, I sent a private message with my phone number. Mike Parmenter

01-24-2025, 09:51 AM	#3
Kevin Panzino Senior Member Join Date: Oct 2002 Location: Pittsburgh Posts: 574 Likes: 298 Liked 747 Times in 136 Posts	Re: Small runner intake gaskets Ditto on cometic cutting a gasket for you with your own part number. Matches perfectly if you do your homework and send either a detailed cad drawing or a perfect template. However, unless anything has changed I wasn?t at all happy with the gasket material they use. It?s quite hard and doesn?t compress very well. Given that there is normally a slight variation in the angle between head and manifold no matter how careful you are with your angle mill calcs, measurements and execution you can wind up with coolant weepers down into the galley you won?t see. Plenty or rtv around the coolant passages is a must! Kp

01-25-2025, 06:20 PM	#4
Jrh5220 Member Join Date: Dec 2021 Location: Pukwana SD Posts: 113 Likes: 466 Liked 28 Times in 17 Posts	Re: Small runner intake gaskets You can make your own with 1290 fel pro.

01-27-2025, 07:30 PM	#5
STK1217 Member Join Date: Nov 2006 Posts: 137 Likes: 47 Liked 10 Times in 7 Posts	Re: Small runner intake gaskets MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ? Last edited by STK1217; 01-27-2025 at 07:32 PM. Reason: size of port

01-28-2025, 12:21 PM	#7
Jeff Stout VIP Member Join Date: Dec 2001 Location: phoenix Posts: 1,486 Likes: 66 Liked 704 Times in 281 Posts	Re: Small runner intake gaskets Ed, I bought a shop out and have several sbc gaskets from different companies. I will look today for any. The 1.8x1.92 is approximate size?