|
![]() |
#1 |
Junior Member
Join Date: Aug 2009
Location: Staten Island N.Y.
Posts: 73
Likes: 99
Liked 13 Times in 6 Posts
|
![]()
I've never seen this mentioned before, When you set your timing on your crank trigger then set the distributer on number one plug how far can you advance or retard the crank trigger before you have adjust the distributer again ? Or you must adjust the distributer every time ? Thanks< By the way I'm not talking big changes just 2 or 4 Degrees
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Dec 2008
Location: Richmond Hill GA (and Port Ludlow WA)
Posts: 4,152
Likes: 2,035
Liked 2,795 Times in 874 Posts
|
![]()
If you move it over 2 degrees I believe you need to check rotor phasing. I’ve got a complete tutorial somewhere and will find it if needed.
__________________
Jim Carter 2340 Super Stock 2340 SST/2340 Stock |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Aug 2009
Location: Staten Island N.Y.
Posts: 73
Likes: 99
Liked 13 Times in 6 Posts
|
![]() |
![]() |
![]() |
![]() |
|
|