CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Race Parts: Classifieds (https://classracer.com/classforum/forumdisplay.php?f=12)
-   -   WTB Spool for 9" Ford (https://classracer.com/classforum/showthread.php?t=37752)

JCChildress 12-15-2011 01:42 PM

WTB Spool for 9" Ford
 
I am looking for a used lightweight steel 40 spline spool for a 9" Ford. I prefer a Mark Williams. I also have for sale, a detroit locker out of a Nascar 9" rear. Call with any info (434) 665-9541.

Paul Hellenberg 12-15-2011 05:14 PM

Re: WTB Spool for 9" Ford
 
Check you PM

JCChildress 12-16-2011 11:58 AM

Re: WTB Spool for 9" Ford
 
I forgot to mention it needs to be for the 3.250 brg

mannymen 12-16-2011 04:01 PM

Re: WTB Spool for 9" Ford
 
Doesn't the MW spool have to be run with their axles, due to the way they machine their units?

Mark Ugrich 12-18-2011 01:35 PM

Re: WTB Spool for 9" Ford
 
I believe the splines are cut at the outer ends of the spool on MW stuff.

Adger Smith 12-18-2011 02:36 PM

Re: WTB Spool for 9" Ford
 
M/W and Strange splines are the same on 40 spline. M/W are a different pitch on 35 spline and will not interchange with Strange. The M/W 40 spline spools I own all have the splines cut all the way to the end of the spool. The Strange are recessed up inside the spool and require axles that are full length and end in the proper position to get a full spline engagement.


All times are GMT -4. The time now is 03:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.